Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 3.138.60.175
# SPDX-License-Identifier: GPL-2.0-only
#
# ADC drivers
#
# When adding new entries keep the list in alphabetical order
menu "Analog to digital converters"
config AB8500_GPADC
bool "ST-Ericsson AB8500 GPADC driver"
depends on AB8500_CORE && REGULATOR_AB8500
default y
help
AB8500 Analog Baseband, mixed signal integrated circuit GPADC
(General Purpose Analog to Digital Converter) driver used to monitor
internal voltages, convert accessory and battery, AC (charger, mains)
and USB voltages integral to the U8500 platform.
config AD_SIGMA_DELTA
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config AD7091R5
tristate "Analog Devices AD7091R5 ADC Driver"
depends on I2C
select REGMAP_I2C
help
Say yes here to build support for Analog Devices AD7091R-5 ADC.
config AD7124
tristate "Analog Devices AD7124 and similar sigma-delta ADCs driver"
depends on SPI_MASTER
select AD_SIGMA_DELTA
help
Say yes here to build support for Analog Devices AD7124-4 and AD7124-8
SPI analog to digital converters (ADC).
To compile this driver as a module, choose M here: the module will be
called ad7124.
config AD7192
tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver"
depends on SPI
select AD_SIGMA_DELTA
help
Say yes here to build support for Analog Devices AD7190,
AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC).
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called ad7192.
config AD7266
tristate "Analog Devices AD7265/AD7266 ADC driver"
depends on SPI_MASTER
select IIO_BUFFER
select IIO_TRIGGER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices AD7265 and AD7266
ADCs.
To compile this driver as a module, choose M here: the module will be
called ad7266.
config AD7291
tristate "Analog Devices AD7291 ADC driver"
depends on I2C
help
Say yes here to build support for Analog Devices AD7291
8 Channel ADC with temperature sensor.
To compile this driver as a module, choose M here: the
module will be called ad7291.
config AD7292
tristate "Analog Devices AD7292 ADC driver"
depends on SPI
help
Say yes here to build support for Analog Devices AD7292
8 Channel ADC with temperature sensor.
To compile this driver as a module, choose M here: the
module will be called ad7292.
config AD7298
tristate "Analog Devices AD7298 ADC driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices AD7298
8 Channel ADC with temperature sensor.
To compile this driver as a module, choose M here: the
module will be called ad7298.
config AD7476
tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD and TI"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the following SPI analog to
digital converters (ADCs):
Analog Devices: AD7273, AD7274, AD7276, AD7277, AD7278, AD7475,
AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, AD7495, AD7910,
AD7920.
Texas Instruments: ADS7866, ADS7867, ADS7868.
To compile this driver as a module, choose M here: the
module will be called ad7476.
config AD7606
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config AD7606_IFACE_PARALLEL
tristate "Analog Devices AD7606 ADC driver with parallel interface support"
depends on HAS_IOMEM
select AD7606
help
Say yes here to build parallel interface support for Analog Devices:
ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
To compile this driver as a module, choose M here: the
module will be called ad7606_parallel.
config AD7606_IFACE_SPI
tristate "Analog Devices AD7606 ADC driver with spi interface support"
depends on SPI
select AD7606
help
Say yes here to build spi interface support for Analog Devices:
ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
To compile this driver as a module, choose M here: the
module will be called ad7606_spi.
config AD7766
tristate "Analog Devices AD7766/AD7767 ADC driver"
depends on SPI_MASTER
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices AD7766, AD7766-1,
AD7766-2, AD7767, AD7767-1, AD7767-2 SPI analog to digital converters.
To compile this driver as a module, choose M here: the module will be
called ad7766.
config AD7768_1
tristate "Analog Devices AD7768-1 ADC driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices AD7768-1 SPI
simultaneously sampling sigma-delta analog to digital converter (ADC).
To compile this driver as a module, choose M here: the module will be
called ad7768-1.
config AD7780
tristate "Analog Devices AD7780 and similar ADCs driver"
depends on SPI
depends on GPIOLIB || COMPILE_TEST
select AD_SIGMA_DELTA
help
Say yes here to build support for Analog Devices AD7170, AD7171,
AD7780 and AD7781 SPI analog to digital converters (ADC).
To compile this driver as a module, choose M here: the
module will be called ad7780.
config AD7791
tristate "Analog Devices AD7791 ADC driver"
depends on SPI
select AD_SIGMA_DELTA
help
Say yes here to build support for Analog Devices AD7787, AD7788, AD7789,
AD7790 and AD7791 SPI analog to digital converters (ADC).
To compile this driver as a module, choose M here: the module will be
called ad7791.
config AD7793
tristate "Analog Devices AD7793 and similar ADCs driver"
depends on SPI
select AD_SIGMA_DELTA
help
Say yes here to build support for Analog Devices AD7785, AD7792, AD7793,
AD7794 and AD7795 SPI analog to digital converters (ADC).
To compile this driver as a module, choose M here: the
module will be called AD7793.
config AD7887
tristate "Analog Devices AD7887 ADC driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices
AD7887 SPI analog to digital converter (ADC).
To compile this driver as a module, choose M here: the
module will be called ad7887.
config AD7923
tristate "Analog Devices AD7923 and similar ADCs driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices
AD7904, AD7914, AD7923, AD7924 4 Channel ADCs.
To compile this driver as a module, choose M here: the
module will be called ad7923.
config AD7949
tristate "Analog Devices AD7949 and similar ADCs driver"
depends on SPI
help
Say yes here to build support for Analog Devices
AD7949, AD7682, AD7689 8 Channel ADCs.
To compile this driver as a module, choose M here: the
module will be called ad7949.
config AD799X
tristate "Analog Devices AD799x ADC driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices:
ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
i2c analog to digital converters (ADC). Provides direct access
via sysfs.
To compile this driver as a module, choose M here: the module will be
called ad799x.
config AD9467
tristate "Analog Devices AD9467 High Speed ADC driver"
depends on SPI
depends on ADI_AXI_ADC
help
Say yes here to build support for Analog Devices:
* AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter
The driver requires the assistance of the AXI ADC IP core to operate,
since SPI is used for configuration only, while data has to be
streamed into memory via DMA.
To compile this driver as a module, choose M here: the module will be
called ad9467.
config ADI_AXI_ADC
tristate "Analog Devices Generic AXI ADC IP core driver"
select IIO_BUFFER
select IIO_BUFFER_HW_CONSUMER
select IIO_BUFFER_DMAENGINE
depends on HAS_IOMEM
depends on OF
help
Say yes here to build support for Analog Devices Generic
AXI ADC IP core. The IP core is used for interfacing with
analog-to-digital (ADC) converters that require either a high-speed
serial interface (JESD204B/C) or a source synchronous parallel
interface (LVDS/CMOS).
Typically (for such devices) SPI will be used for configuration only,
while this IP core handles the streaming of data into memory via DMA.
Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called adi-axi-adc.
config ASPEED_ADC
tristate "Aspeed ADC"
depends on ARCH_ASPEED || COMPILE_TEST
depends on COMMON_CLK
help
If you say yes here you get support for the ADC included in Aspeed
BMC SoCs.
To compile this driver as a module, choose M here: the module will be
called aspeed_adc.
config AT91_ADC
tristate "Atmel AT91 ADC"
depends on ARCH_AT91 || COMPILE_TEST
depends on INPUT && SYSFS && OF
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Atmel AT91 ADC.
To compile this driver as a module, choose M here: the module will be
called at91_adc.
config AT91_SAMA5D2_ADC
tristate "Atmel AT91 SAMA5D2 ADC"
depends on ARCH_AT91 || COMPILE_TEST
depends on HAS_IOMEM
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Atmel SAMA5D2 ADC which is
available on SAMA5D2 SoC family.
To compile this driver as a module, choose M here: the module will be
called at91-sama5d2_adc.
config AXP20X_ADC
tristate "X-Powers AXP20X and AXP22X ADC driver"
depends on MFD_AXP20X
help
Say yes here to have support for X-Powers power management IC (PMIC)
AXP20X and AXP22X ADC devices.
To compile this driver as a module, choose M here: the module will be
called axp20x_adc.
config AXP288_ADC
tristate "X-Powers AXP288 ADC driver"
depends on MFD_AXP20X
help
Say yes here to have support for X-Powers power management IC (PMIC) ADC
device. Depending on platform configuration, this general purpose ADC can
be used for sampling sensors such as thermal resistors.
To compile this driver as a module, choose M here: the module will be
called axp288_adc.
config BCM_IPROC_ADC
tristate "Broadcom IPROC ADC driver"
depends on (ARCH_BCM_IPROC && OF) || COMPILE_TEST
depends on MFD_SYSCON
default ARCH_BCM_CYGNUS
help
Say Y here if you want to add support for the Broadcom static
ADC driver.
Broadcom iProc ADC driver. Broadcom iProc ADC controller has 8
channels. The driver allows the user to read voltage values.
config BERLIN2_ADC
tristate "Marvell Berlin2 ADC driver"
depends on ARCH_BERLIN
help
Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for
temperature measurement.
config CC10001_ADC
tristate "Cosmic Circuits 10001 ADC driver"
depends on HAS_IOMEM && HAVE_CLK && REGULATOR
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Cosmic Circuits 10001 ADC.
This driver can also be built as a module. If so, the module will be
called cc10001_adc.
config CPCAP_ADC
tristate "Motorola CPCAP PMIC ADC driver"
depends on MFD_CPCAP
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Motorola CPCAP PMIC ADC.
This driver can also be built as a module. If so, the module will be
called cpcap-adc.
config DA9150_GPADC
tristate "Dialog DA9150 GPADC driver support"
depends on MFD_DA9150
help
Say yes here to build support for Dialog DA9150 GPADC.
This driver can also be built as a module. If chosen, the module name
will be da9150-gpadc.
To compile this driver as a module, choose M here: the module will be
called berlin2-adc.
config DLN2_ADC
tristate "Diolan DLN-2 ADC driver support"
depends on MFD_DLN2
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Diolan DLN-2 ADC.
This driver can also be built as a module. If so, the module will be
called adc_dln2.
config ENVELOPE_DETECTOR
tristate "Envelope detector using a DAC and a comparator"
depends on OF
help
Say yes here to build support for an envelope detector using a DAC
and a comparator.
To compile this driver as a module, choose M here: the module will be
called envelope-detector.
config EP93XX_ADC
tristate "Cirrus Logic EP93XX ADC driver"
depends on ARCH_EP93XX
help
Driver for the ADC module on the EP93XX series of SoC from Cirrus Logic.
It's recommended to switch on CONFIG_HIGH_RES_TIMERS option, in this
case driver will reduce its CPU usage by 90% in some use cases.
To compile this driver as a module, choose M here: the module will be
called ep93xx_adc.
config EXYNOS_ADC
tristate "Exynos ADC driver support"
depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
depends on HAS_IOMEM
help
Core support for the ADC block found in the Samsung EXYNOS series
of SoCs for drivers such as the touchscreen and hwmon to use to share
this resource.
To compile this driver as a module, choose M here: the module will be
called exynos_adc.
config MXS_LRADC_ADC
tristate "Freescale i.MX23/i.MX28 LRADC ADC"
depends on MFD_MXS_LRADC
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the ADC functions of the
i.MX23/i.MX28 LRADC. This includes general-purpose ADC readings,
battery voltage measurement, and die temperature measurement.
This driver can also be built as a module. If so, the module will be
called mxs-lradc-adc.
config FSL_MX25_ADC
tristate "Freescale MX25 ADC driver"
depends on MFD_MX25_TSADC
help
Generic Conversion Queue driver used for general purpose ADC in the
MX25. This driver supports single measurements using the MX25 ADC.
config HI8435
tristate "Holt Integrated Circuits HI-8435 threshold detector"
select IIO_TRIGGERED_EVENT
depends on SPI
help
If you say yes here you get support for Holt Integrated Circuits
HI-8435 chip.
This driver can also be built as a module. If so, the module will be
called hi8435.
config HX711
tristate "AVIA HX711 ADC for weight cells"
depends on GPIOLIB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for AVIA HX711 ADC which is used
for weigh cells
This driver uses two GPIOs, one acts as the clock and controls the
channel selection and gain, the other one is used for the measurement
data
Currently the raw value is read from the chip and delivered.
To get an actual weight one needs to subtract the
zero offset and multiply by a scale factor.
This should be done in userspace.
This driver can also be built as a module. If so, the module will be
called hx711.
config INA2XX_ADC
tristate "Texas Instruments INA2xx Power Monitors IIO driver"
depends on I2C && !SENSORS_INA2XX
select REGMAP_I2C
select IIO_BUFFER
select IIO_KFIFO_BUF
help
Say yes here to build support for TI INA2xx family of Power Monitors.
This driver is mutually exclusive with the HWMON version.
config INGENIC_ADC
tristate "Ingenic JZ47xx SoCs ADC driver"
depends on MIPS || COMPILE_TEST
select IIO_BUFFER
help
Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit.
This driver can also be built as a module. If so, the module will be
called ingenic_adc.
config INTEL_MRFLD_ADC
tristate "Intel Merrifield Basin Cove ADC driver"
depends on INTEL_SOC_PMIC_MRFLD
help
Say yes here to have support for Basin Cove power management IC (PMIC) ADC
device. Depending on platform configuration, this general purpose ADC can
be used for sampling sensors such as thermal resistors.
To compile this driver as a module, choose M here: the module will be
called intel_mrfld_adc.
config IMX7D_ADC
tristate "Freescale IMX7D ADC driver"
depends on ARCH_MXC || COMPILE_TEST
depends on HAS_IOMEM
help
Say yes here to build support for IMX7D ADC.
This driver can also be built as a module. If so, the module will be
called imx7d_adc.
config LP8788_ADC
tristate "LP8788 ADC driver"
depends on MFD_LP8788
help
Say yes here to build support for TI LP8788 ADC.
To compile this driver as a module, choose M here: the module will be
called lp8788_adc.
config LPC18XX_ADC
tristate "NXP LPC18xx ADC driver"
depends on ARCH_LPC18XX || COMPILE_TEST
depends on OF && HAS_IOMEM
help
Say yes here to build support for NXP LPC18XX ADC.
To compile this driver as a module, choose M here: the module will be
called lpc18xx_adc.
config LPC32XX_ADC
tristate "NXP LPC32XX ADC"
depends on ARCH_LPC32XX || COMPILE_TEST
depends on HAS_IOMEM
help
Say yes here to build support for the integrated ADC inside the
LPC32XX SoC. Note that this feature uses the same hardware as the
touchscreen driver, so you should either select only one of the two
drivers (lpc32xx_adc or lpc32xx_ts) or, in the OpenFirmware case,
activate only one via device tree selection. Provides direct access
via sysfs.
config LTC2471
tristate "Linear Technology LTC2471 and LTC2473 ADC driver"
depends on I2C
help
Say yes here to build support for Linear Technology LTC2471 and
LTC2473 16-bit I2C ADC.
This driver can also be built as a module. If so, the module will
be called ltc2471.
config LTC2485
tristate "Linear Technology LTC2485 ADC driver"
depends on I2C
help
Say yes here to build support for Linear Technology LTC2485 ADC.
To compile this driver as a module, choose M here: the module will be
called ltc2485.
config LTC2496
tristate "Linear Technology LTC2496 ADC driver"
depends on SPI
help
Say yes here to build support for Linear Technology LTC2496
16-Bit 8-/16-Channel Delta Sigma ADC.
To compile this driver as a module, choose M here: the module will be
called ltc2496.
config LTC2497
tristate "Linear Technology LTC2497 ADC driver"
depends on I2C
help
Say yes here to build support for Linear Technology LTC2497
16-Bit 8-/16-Channel Delta Sigma ADC.
To compile this driver as a module, choose M here: the module will be
called ltc2497.
config MAX1027
tristate "Maxim max1027 ADC driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Maxim SPI {10,12}-bit ADC models:
max1027, max1029, max1031, max1227, max1229 and max1231.
To compile this driver as a module, choose M here: the module will be
called max1027.
config MAX11100
tristate "Maxim max11100 ADC driver"
depends on SPI_MASTER
help
Say yes here to build support for Maxim max11100 SPI ADC
To compile this driver as a module, choose M here: the module will be
called max11100.
config MAX1118
tristate "Maxim max1117/max1118/max1119 ADCs driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Maxim max1117/max1118/max1119
8-bit, dual-channel ADCs.
To compile this driver as a module, choose M here: the module will be
called max1118.
config MAX1241
tristate "Maxim max1241 ADC driver"
depends on SPI_MASTER
help
Say yes here to build support for Maxim max1241 12-bit, single-channel
ADC.
To compile this driver as a module, choose M here: the module will be
called max1241.
config MAX1363
tristate "Maxim max1363 ADC driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for many Maxim i2c analog to digital
converters (ADC). (max1361, max1362, max1363, max1364, max1036,
max1037, max1038, max1039, max1136, max1136, max1137, max1138,
max1139, max1236, max1237, max11238, max1239, max11600, max11601,
max11602, max11603, max11604, max11605, max11606, max11607,
max11608, max11609, max11610, max11611, max11612, max11613,
max11614, max11615, max11616, max11617, max11644, max11645,
max11646, max11647) Provides direct access via sysfs and buffered
data via the iio dev interface.
To compile this driver as a module, choose M here: the module will be
called max1363.
config MAX9611
tristate "Maxim max9611/max9612 ADC driver"
depends on I2C
help
Say yes here to build support for Maxim max9611/max9612 current sense
amplifier with 12-bits ADC interface.
To compile this driver as a module, choose M here: the module will be
called max9611.
config MCP320X
tristate "Microchip Technology MCP3x01/02/04/08 and MCP3550/1/3"
depends on SPI
help
Say yes here to build support for Microchip Technology's
MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204,
MCP3208, MCP3301, MCP3550, MCP3551 and MCP3553 analog to digital
converters.
This driver can also be built as a module. If so, the module will be
called mcp320x.
config MCP3422
tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver"
depends on I2C
help
Say yes here to build support for Microchip Technology's MCP3421
MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428
analog to digital converters.
This driver can also be built as a module. If so, the module will be
called mcp3422.
config MCP3911
tristate "Microchip Technology MCP3911 driver"
depends on SPI
help
Say yes here to build support for Microchip Technology's MCP3911
analog to digital converter.
This driver can also be built as a module. If so, the module will be
called mcp3911.
config MEDIATEK_MT6360_ADC
tristate "Mediatek MT6360 ADC driver"
depends on MFD_MT6360
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here to enable MT6360 ADC support.
Integrated for System Monitoring includes
is used in smartphones and tablets and supports a 11 channel
general purpose ADC.
config MEDIATEK_MT6577_AUXADC
tristate "MediaTek AUXADC driver"
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on HAS_IOMEM
help
Say yes here to enable support for MediaTek mt65xx AUXADC.
The driver supports immediate mode operation to read from one of sixteen
channels (external or internal).
This driver can also be built as a module. If so, the module will be
called mt6577_auxadc.
config MEN_Z188_ADC
tristate "MEN 16z188 ADC IP Core support"
depends on MCB
help
Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB
carrier.
This driver can also be built as a module. If so, the module will be
called men_z188_adc.
config MESON_SARADC
tristate "Amlogic Meson SAR ADC driver"
default ARCH_MESON
depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
select REGMAP_MMIO
help
Say yes here to build support for the SAR ADC found in Amlogic Meson
SoCs.
To compile this driver as a module, choose M here: the
module will be called meson_saradc.
config MP2629_ADC
tristate "Monolithic MP2629 ADC driver"
depends on MFD_MP2629
help
Say yes to have support for battery charger IC MP2629 ADC device
accessed over I2C.
This driver provides ADC conversion of system, input power supply
and battery voltage & current information.
config NAU7802
tristate "Nuvoton NAU7802 ADC driver"
depends on I2C
help
Say yes here to build support for Nuvoton NAU7802 ADC.
To compile this driver as a module, choose M here: the
module will be called nau7802.
config NPCM_ADC
tristate "Nuvoton NPCM ADC driver"
depends on ARCH_NPCM || COMPILE_TEST
depends on HAS_IOMEM
help
Say yes here to build support for Nuvoton NPCM ADC.
This driver can also be built as a module. If so, the module
will be called npcm_adc.
config PALMAS_GPADC
tristate "TI Palmas General Purpose ADC"
depends on MFD_PALMAS
help
Palmas series pmic chip by Texas Instruments (twl6035/6037)
is used in smartphones and tablets and supports a 16 channel
general purpose ADC.
config QCOM_VADC_COMMON
tristate
config QCOM_PM8XXX_XOADC
tristate "Qualcomm SSBI PM8xxx PMIC XOADCs"
depends on MFD_PM8XXX
select QCOM_VADC_COMMON
help
ADC driver for the XOADC portions of the Qualcomm PM8xxx PMICs
using SSBI transport: PM8018, PM8038, PM8058, PM8921.
To compile this driver as a module, choose M here: the module
will be called qcom-pm8xxx-xoadc.
config QCOM_SPMI_IADC
tristate "Qualcomm SPMI PMIC current ADC"
depends on SPMI
select REGMAP_SPMI
help
This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip.
The driver supports single mode operation to read from one of two
channels (external or internal). Hardware have additional
channels internally used for gain and offset calibration.
To compile this driver as a module, choose M here: the module will
be called qcom-spmi-iadc.
config QCOM_SPMI_VADC
tristate "Qualcomm SPMI PMIC voltage ADC"
depends on SPMI
select REGMAP_SPMI
select QCOM_VADC_COMMON
help
This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip.
The driver supports multiple channels read. The VADC is a 15-bit
sigma-delta ADC. Some of the channels are internally used for
calibration.
To compile this driver as a module, choose M here: the module will
be called qcom-spmi-vadc.
config QCOM_SPMI_ADC5
tristate "Qualcomm Technologies Inc. SPMI PMIC5 ADC"
depends on SPMI
select REGMAP_SPMI
select QCOM_VADC_COMMON
help
This is the IIO Voltage PMIC5 ADC driver for Qualcomm Technologies Inc.
The driver supports multiple channels read. The ADC is a 16-bit
sigma-delta ADC. The hardware supports calibrated results for
conversion requests and clients include reading voltage phone
power, on board system thermistors connected to the PMIC ADC,
PMIC die temperature, charger temperature, battery current, USB voltage
input, voltage signals connected to supported PMIC GPIO inputs. The
hardware supports internal pull-up for thermistors and can choose between
a 100k, 30k and 400k pull up using the ADC channels.
To compile this driver as a module, choose M here: the module will
be called qcom-spmi-adc5.
config RCAR_GYRO_ADC
tristate "Renesas R-Car GyroADC driver"
depends on ARCH_RCAR_GEN2 || COMPILE_TEST
help
Say yes here to build support for the GyroADC found in Renesas
R-Car Gen2 SoCs. This block is a simple SPI offload engine for
reading data out of attached compatible ADCs in a round-robin
fashion. Up to 4 or 8 ADC channels are supported by this block,
depending on which ADCs are attached.
To compile this driver as a module, choose M here: the
module will be called rcar-gyroadc.
config RN5T618_ADC
tristate "ADC for the RN5T618/RC5T619 family of chips"
depends on MFD_RN5T618
help
Say yes here to build support for the integrated ADC inside the
RN5T618/619 series PMICs:
This driver can also be built as a module. If so, the module
will be called rn5t618-adc.
config ROCKCHIP_SARADC
tristate "Rockchip SARADC driver"
depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on RESET_CONTROLLER
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the SARADC found in SoCs from
Rockchip.
To compile this driver as a module, choose M here: the
module will be called rockchip_saradc.
config RZG2L_ADC
tristate "Renesas RZ/G2L ADC driver"
depends on ARCH_R9A07G044 || COMPILE_TEST
help
Say yes here to build support for the ADC found in Renesas
RZ/G2L family.
To compile this driver as a module, choose M here: the
module will be called rzg2l_adc.
config SC27XX_ADC
tristate "Spreadtrum SC27xx series PMICs ADC"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
help
Say yes here to build support for the integrated ADC inside the
Spreadtrum SC27xx series PMICs.
This driver can also be built as a module. If so, the module
will be called sc27xx_adc.
config SPEAR_ADC
tristate "ST SPEAr ADC"
depends on PLAT_SPEAR || COMPILE_TEST
depends on HAS_IOMEM
help
Say yes here to build support for the integrated ADC inside the
ST SPEAr SoC. Provides direct access via sysfs.
To compile this driver as a module, choose M here: the
module will be called spear_adc.
config SD_ADC_MODULATOR
tristate "Generic sigma delta modulator"
depends on OF
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Select this option to enables sigma delta modulator. This driver can
support generic sigma delta modulators.
This driver can also be built as a module. If so, the module
will be called sd_adc_modulator.
config STM32_ADC_CORE
tristate "STMicroelectronics STM32 adc core"
depends on ARCH_STM32 || COMPILE_TEST
depends on OF
depends on REGULATOR
depends on HAS_IOMEM
select IIO_BUFFER
select MFD_STM32_TIMERS
select IIO_STM32_TIMER_TRIGGER
select IIO_TRIGGERED_BUFFER
help
Select this option to enable the core driver for STMicroelectronics
STM32 analog-to-digital converter (ADC).
This driver can also be built as a module. If so, the module
will be called stm32-adc-core.
config STM32_ADC
tristate "STMicroelectronics STM32 adc"
depends on STM32_ADC_CORE
help
Say yes here to build support for STMicroelectronics stm32 Analog
to Digital Converter (ADC).
This driver can also be built as a module. If so, the module
will be called stm32-adc.
config STM32_DFSDM_CORE
tristate "STMicroelectronics STM32 DFSDM core"
depends on (ARCH_STM32 && OF) || COMPILE_TEST
select REGMAP
select REGMAP_MMIO
help
Select this option to enable the driver for STMicroelectronics
STM32 digital filter for sigma delta converter.
This driver can also be built as a module. If so, the module
will be called stm32-dfsdm-core.
config STM32_DFSDM_ADC
tristate "STMicroelectronics STM32 dfsdm adc"
depends on (ARCH_STM32 && OF) || COMPILE_TEST
select STM32_DFSDM_CORE
select REGMAP_MMIO
select IIO_BUFFER
select IIO_BUFFER_HW_CONSUMER
select IIO_TRIGGERED_BUFFER
help
Select this option to support ADCSigma delta modulator for
STMicroelectronics STM32 digital filter for sigma delta converter.
This driver can also be built as a module. If so, the module
will be called stm32-dfsdm-adc.
config STMPE_ADC
tristate "STMicroelectronics STMPE ADC driver"
depends on OF && MFD_STMPE
help
Say yes here to build support for ST Microelectronics STMPE
built-in ADC block (stmpe811).
config SUN4I_GPADC
tristate "Support for the Allwinner SoCs GPADC"
depends on IIO
depends on MFD_SUN4I_GPADC || MACH_SUN8I
depends on THERMAL || !THERMAL_OF
select REGMAP_IRQ
help
Say yes here to build support for Allwinner (A10, A13 and A31) SoCs
GPADC. This ADC provides 4 channels which can be used as an ADC or as
a touchscreen input and one channel for thermal sensor.
The thermal sensor slows down ADC readings and can be disabled by
disabling CONFIG_THERMAL_OF. However, the thermal sensor should be
enabled by default since the SoC temperature is usually more critical
than ADC readings.
To compile this driver as a module, choose M here: the module will be
called sun4i-gpadc-iio.
config TI_ADC081C
tristate "Texas Instruments ADC081C/ADC101C/ADC121C family"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for Texas Instruments ADC081C,
ADC101C and ADC121C ADC chips.
This driver can also be built as a module. If so, the module will be
called ti-adc081c.
config TI_ADC0832
tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for Texas Instruments ADC0831,
ADC0832, ADC0834, ADC0838 ADC chips.
This driver can also be built as a module. If so, the module will be
called ti-adc0832.
config TI_ADC084S021
tristate "Texas Instruments ADC084S021"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for Texas Instruments ADC084S021
chips.
This driver can also be built as a module. If so, the module will be
called ti-adc084s021.
config TI_ADC12138
tristate "Texas Instruments ADC12130/ADC12132/ADC12138"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for Texas Instruments ADC12130,
ADC12132 and ADC12138 chips.
This driver can also be built as a module. If so, the module will be
called ti-adc12138.
config TI_ADC108S102
tristate "Texas Instruments ADC108S102 and ADC128S102 driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Texas Instruments ADC108S102 and
ADC128S102 ADC.
To compile this driver as a module, choose M here: the module will
be called ti-adc108s102.
config TI_ADC128S052
tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021"
depends on SPI
help
If you say yes here you get support for Texas Instruments ADC128S052,
ADC122S021 and ADC124S021 chips.
This driver can also be built as a module. If so, the module will be
called ti-adc128s052.
config TI_ADC161S626
tristate "Texas Instruments ADC161S626 1-channel differential ADC"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for Texas Instruments ADC141S626,
and ADC161S626 chips.
This driver can also be built as a module. If so, the module will be
called ti-adc161s626.
config TI_ADS1015
tristate "Texas Instruments ADS1015 ADC"
depends on I2C
select REGMAP_I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for Texas Instruments ADS1015
ADC chip.
This driver can also be built as a module. If so, the module will be
called ti-ads1015.
config TI_ADS7950
tristate "Texas Instruments ADS7950 ADC driver"
depends on SPI && GPIOLIB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Texas Instruments ADS7950, ADS7951,
ADS7952, ADS7953, ADS7954, ADS7955, ADS7956, ADS7957, ADS7958, ADS7959.
ADS7960, ADS7961.
To compile this driver as a module, choose M here: the
module will be called ti-ads7950.
config TI_ADS8344
tristate "Texas Instruments ADS8344"
depends on SPI && OF
help
If you say yes here you get support for Texas Instruments ADS8344
ADC chips
This driver can also be built as a module. If so, the module will be
called ti-ads8344.
config TI_ADS8688
tristate "Texas Instruments ADS8688"
depends on SPI && OF
help
If you say yes here you get support for Texas Instruments ADS8684 and
and ADS8688 ADC chips
This driver can also be built as a module. If so, the module will be
called ti-ads8688.
config TI_ADS124S08
tristate "Texas Instruments ADS124S08"
depends on SPI && OF
help
If you say yes here you get support for Texas Instruments ADS124S08
and ADS124S06 ADC chips
This driver can also be built as a module. If so, the module will be
called ti-ads124s08.
config TI_ADS131E08
tristate "Texas Instruments ADS131E08"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to get support for Texas Instruments ADS131E04, ADS131E06
and ADS131E08 chips.
This driver can also be built as a module. If so, the module will be
called ti-ads131e08.
config TI_AM335X_ADC
tristate "TI's AM335X ADC driver"
depends on MFD_TI_AM335X_TSCADC && HAS_DMA
select IIO_BUFFER
select IIO_KFIFO_BUF
help
Say yes here to build support for Texas Instruments ADC
driver which is also a MFD client.
To compile this driver as a module, choose M here: the module will be
called ti_am335x_adc.
config TI_TLC4541
tristate "Texas Instruments TLC4541 ADC driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Texas Instruments TLC4541 / TLC3541
ADC chips.
This driver can also be built as a module. If so, the module will be
called ti-tlc4541.
config TI_TSC2046
tristate "Texas Instruments TSC2046 ADC driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for ADC functionality of Texas
Instruments TSC2046 touch screen controller.
This driver can also be built as a module. If so, the module will be
called ti-tsc2046.
config TWL4030_MADC
tristate "TWL4030 MADC (Monitoring A/D Converter)"
depends on TWL4030_CORE
help
This driver provides support for Triton TWL4030-MADC. The
driver supports both RT and SW conversion methods.
This driver can also be built as a module. If so, the module will be
called twl4030-madc.
config TWL6030_GPADC
tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
depends on TWL4030_CORE
default n
help
Say yes here if you want support for the TWL6030/TWL6032 General
Purpose A/D Converter. This will add support for battery type
detection, battery voltage and temperature measurement, die
temperature measurement, system supply voltage, audio accessory,
USB ID detection.
This driver can also be built as a module. If so, the module will be
called twl6030-gpadc.
config VF610_ADC
tristate "Freescale vf610 ADC driver"
depends on OF
depends on HAS_IOMEM
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to support for Vybrid board analog-to-digital converter.
Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX.
This driver can also be built as a module. If so, the module will be
called vf610_adc.
config VIPERBOARD_ADC
tristate "Viperboard ADC support"
depends on MFD_VIPERBOARD && USB
help
Say yes here to access the ADC part of the Nano River
Technologies Viperboard.
To compile this driver as a module, choose M here: the module will be
called viperboard_adc.
config XILINX_XADC
tristate "Xilinx XADC driver"
depends on HAS_IOMEM
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to have support for the Xilinx 7 Series XADC or
UltraScale/UltraScale+ System Management Wizard.
For the 7 Series the driver does support both the ZYNQ interface
to the XADC as well as the AXI-XADC interface.
The driver also support the Xilinx System Management Wizard IP core
that can be used to access the System Monitor ADC on the Xilinx
UltraScale and UltraScale+ FPGAs.
The driver can also be build as a module. If so, the module will be called
xilinx-xadc.
endmenu
|