Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 3.144.104.175
# SPDX-License-Identifier: GPL-2.0-only
#
# Platform drivers
# Most drivers here are currently for webcam support
menuconfig V4L_PLATFORM_DRIVERS
bool "V4L platform devices"
help
Say Y here to enable support for platform-specific V4L drivers.
if V4L_PLATFORM_DRIVERS
source "drivers/media/platform/marvell-ccic/Kconfig"
config VIDEO_VIA_CAMERA
tristate "VIAFB camera controller support"
depends on FB_VIA && VIDEO_V4L2
select VIDEOBUF2_DMA_SG
select VIDEO_OV7670
help
Driver support for the integrated camera controller in VIA
Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
with ov7670 sensors.
#
# Platform multimedia device configuration
#
source "drivers/media/platform/cadence/Kconfig"
source "drivers/media/platform/davinci/Kconfig"
source "drivers/media/platform/omap/Kconfig"
config VIDEO_ASPEED
tristate "Aspeed AST2400 and AST2500 Video Engine driver"
depends on VIDEO_V4L2
select VIDEOBUF2_DMA_CONTIG
help
Support for the Aspeed Video Engine (VE) embedded in the Aspeed
AST2400 and AST2500 SOCs. The VE can capture and compress video data
from digital or analog sources.
config VIDEO_SH_VOU
tristate "SuperH VOU video output driver"
depends on VIDEO_DEV && I2C
depends on ARCH_SHMOBILE || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
help
Support for the Video Output Unit (VOU) on SuperH SoCs.
config VIDEO_VIU
tristate "Freescale VIU Video Driver"
depends on VIDEO_V4L2 && (PPC_MPC512x || COMPILE_TEST) && I2C
select VIDEOBUF_DMA_CONTIG
default y
help
Support for Freescale VIU video driver. This device captures
video data, or overlays video on DIU frame buffer.
Say Y here if you want to enable VIU device on MPC5121e Rev2+.
In doubt, say N.
config VIDEO_MUX
tristate "Video Multiplexer"
select MULTIPLEXER
depends on VIDEO_V4L2 && OF
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select REGMAP
select V4L2_FWNODE
help
This driver provides support for N:1 video bus multiplexers.
config VIDEO_OMAP3
tristate "OMAP 3 Camera support"
depends on VIDEO_V4L2 && I2C
depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST
depends on COMMON_CLK && OF
select ARM_DMA_USE_IOMMU if OMAP_IOMMU
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select MFD_SYSCON
select V4L2_FWNODE
help
Driver for an OMAP 3 camera controller.
config VIDEO_OMAP3_DEBUG
bool "OMAP 3 Camera debug messages"
depends on VIDEO_OMAP3
help
Enable debug messages on OMAP 3 camera controller driver.
config VIDEO_PXA27x
tristate "PXA27x Quick Capture Interface driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on PXA27x || COMPILE_TEST
select VIDEOBUF2_DMA_SG
select SG_SPLIT
select V4L2_FWNODE
help
This is a v4l2 driver for the PXA27x Quick Capture Interface
config VIDEO_QCOM_CAMSS
tristate "Qualcomm V4L2 Camera Subsystem driver"
depends on VIDEO_V4L2
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_SG
select V4L2_FWNODE
config VIDEO_S3C_CAMIF
tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
depends on VIDEO_V4L2 && I2C && PM
depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
help
This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
host interface (CAMIF).
To compile this driver as a module, choose M here: the module
will be called s3c-camif.
config VIDEO_STM32_DCMI
tristate "STM32 Digital Camera Memory Interface (DCMI) support"
depends on VIDEO_V4L2 && OF
depends on ARCH_STM32 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select MEDIA_CONTROLLER
select V4L2_FWNODE
help
This module makes the STM32 Digital Camera Memory Interface (DCMI)
available as a v4l2 device.
To compile this driver as a module, choose M here: the module
will be called stm32-dcmi.
config VIDEO_RENESAS_CEU
tristate "Renesas Capture Engine Unit (CEU) driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
This is a v4l2 driver for the Renesas CEU Interface
config VIDEO_ROCKCHIP_ISP1
tristate "Rockchip Image Signal Processing v1 Unit driver"
depends on VIDEO_V4L2 && OF
depends on ARCH_ROCKCHIP || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_VMALLOC
select V4L2_FWNODE
select GENERIC_PHY_MIPI_DPHY
default n
help
Enable this to support the Image Signal Processing (ISP) module
present in RK3399 SoCs.
To compile this driver as a module, choose M here: the module
will be called rockchip-isp1.
source "drivers/media/platform/exynos4-is/Kconfig"
source "drivers/media/platform/am437x/Kconfig"
source "drivers/media/platform/xilinx/Kconfig"
source "drivers/media/platform/rcar-vin/Kconfig"
source "drivers/media/platform/atmel/Kconfig"
source "drivers/media/platform/sunxi/Kconfig"
config VIDEO_TI_CAL
tristate "TI CAL (Camera Adaptation Layer) driver"
depends on VIDEO_DEV && VIDEO_V4L2
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
Support for the TI CAL (Camera Adaptation Layer) block
found on DRA72X SoC.
In TI Technical Reference Manual this module is referred as
Camera Interface Subsystem (CAMSS).
if VIDEO_TI_CAL
config VIDEO_TI_CAL_MC
bool "Media Controller centric mode by default"
default n
help
Enables Media Controller centric mode by default.
If set, CAL driver will start in Media Controller mode by
default. Note that this behavior can be overridden via
module parameter 'mc_api'.
endif # VIDEO_TI_CAL
endif # V4L_PLATFORM_DRIVERS
menuconfig V4L_MEM2MEM_DRIVERS
bool "Memory-to-memory multimedia devices"
depends on VIDEO_V4L2
help
Say Y here to enable selecting drivers for V4L devices that
use system memory for both source and destination buffers, as opposed
to capture and output drivers, which use memory buffers for just
one of those.
if V4L_MEM2MEM_DRIVERS
config VIDEO_ALLEGRO_DVT
tristate "Allegro DVT Video IP Core"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_ZYNQMP || COMPILE_TEST
select V4L2_MEM2MEM_DEV
select VIDEOBUF2_DMA_CONTIG
select REGMAP_MMIO
help
Support for the encoder video IP core by Allegro DVT. This core is
found for example on the Xilinx ZynqMP SoC in the EV family and is
called VCU in the reference manual.
To compile this driver as a module, choose M here: the module
will be called allegro.
config VIDEO_CODA
tristate "Chips&Media Coda multi-standard codec IP"
depends on VIDEO_DEV && VIDEO_V4L2 && OF && (ARCH_MXC || COMPILE_TEST)
select SRAM
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_VMALLOC
select V4L2_JPEG_HELPER
select V4L2_MEM2MEM_DEV
select GENERIC_ALLOCATOR
help
Coda is a range of video codec IPs that supports
H.264, MPEG-4, and other video formats.
config VIDEO_IMX_VDOA
def_tristate VIDEO_CODA if SOC_IMX6Q || COMPILE_TEST
config VIDEO_IMX_PXP
tristate "i.MX Pixel Pipeline (PXP)"
depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST)
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
The i.MX Pixel Pipeline is a memory-to-memory engine for scaling,
color space conversion, and rotation.
source "drivers/media/platform/imx-jpeg/Kconfig"
config VIDEO_MEDIATEK_JPEG
tristate "Mediatek JPEG Codec driver"
depends on MTK_IOMMU_V1 || MTK_IOMMU || COMPILE_TEST
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
Mediatek jpeg codec driver provides HW capability to decode
JPEG format
To compile this driver as a module, choose M here: the
module will be called mtk-jpeg
config VIDEO_MEDIATEK_VPU
tristate "Mediatek Video Processor Unit"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MEDIATEK || COMPILE_TEST
help
This driver provides downloading VPU firmware and
communicating with VPU. This driver for hw video
codec embedded in Mediatek's MT8173 SOCs. It is able
to handle video decoding/encoding in a range of formats.
To compile this driver as a module, choose M here: the
module will be called mtk-vpu.
config VIDEO_MEDIATEK_MDP
tristate "Mediatek MDP driver"
depends on MTK_IOMMU || COMPILE_TEST
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select VIDEO_MEDIATEK_VPU
help
It is a v4l2 driver and present in Mediatek MT8173 SoCs.
The driver supports for scaling and color space conversion.
To compile this driver as a module, choose M here: the
module will be called mtk-mdp.
config VIDEO_MEDIATEK_VCODEC
tristate "Mediatek Video Codec driver"
depends on MTK_IOMMU || COMPILE_TEST
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on VIDEO_MEDIATEK_VPU || MTK_SCP
# The two following lines ensure we have the same state ("m" or "y") as
# our dependencies, to avoid missing symbols during link.
depends on VIDEO_MEDIATEK_VPU || !VIDEO_MEDIATEK_VPU
depends on MTK_SCP || !MTK_SCP
depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU
select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP
help
Mediatek video codec driver provides HW capability to
encode and decode in a range of video formats on MT8173
and MT8183.
Note that support for MT8173 requires VIDEO_MEDIATEK_VPU to
also be selected. Support for MT8183 depends on MTK_SCP.
To compile this driver as modules, choose M here: the
modules will be called mtk-vcodec-dec and mtk-vcodec-enc.
config VIDEO_MEDIATEK_VCODEC_VPU
bool
config VIDEO_MEDIATEK_VCODEC_SCP
bool
config VIDEO_MEM2MEM_DEINTERLACE
tristate "Deinterlace support"
depends on VIDEO_DEV && VIDEO_V4L2
depends on HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
Generic deinterlacing V4L2 driver.
config VIDEO_MESON_GE2D
tristate "Amlogic 2D Graphic Acceleration Unit"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MESON || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
This is a v4l2 driver for Amlogic GE2D 2D graphics accelerator.
GE2D is a standalone 2D graphic acceleration unit, with color converter,
image scaling, BitBLT & alpha blending operations.
To compile this driver as a module choose m here.
config VIDEO_SAMSUNG_S5P_G2D
tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
2d graphics accelerator.
config VIDEO_SAMSUNG_S5P_JPEG
tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
This is a v4l2 driver for Samsung S5P, EXYNOS3250
and EXYNOS4 JPEG codec
config VIDEO_SAMSUNG_S5P_MFC
tristate "Samsung S5P MFC Video Codec"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
help
MFC 5.1 and 6.x driver for V4L2
config VIDEO_MX2_EMMAPRP
tristate "MX2 eMMa-PrP support"
depends on VIDEO_DEV && VIDEO_V4L2
depends on SOC_IMX27 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
MX2X chips have a PrP that can be used to process buffers from
memory to memory. Operations include resizing and format
conversion.
config VIDEO_SAMSUNG_EXYNOS_GSC
tristate "Samsung Exynos G-Scaler driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler.
config VIDEO_STI_BDISP
tristate "STMicroelectronics BDISP 2D blitter driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_STI || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC.
config VIDEO_STI_HVA
tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_STI || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
This V4L2 driver enables HVA (Hardware Video Accelerator) multi-format
video encoder of STMicroelectronics SoC, allowing hardware encoding of
raw uncompressed formats in various compressed video bitstreams format.
To compile this driver as a module, choose M here:
the module will be called st-hva.
config VIDEO_STI_HVA_DEBUGFS
bool "Export STMicroelectronics HVA internals in debugfs"
depends on VIDEO_STI_HVA
depends on DEBUG_FS
help
Select this to see information about the internal state and the last
operation of STMicroelectronics HVA multi-format video encoder in
debugfs.
Choose N unless you know you need this.
config VIDEO_STI_DELTA
tristate "STMicroelectronics DELTA multi-format video decoder V4L2 driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_STI || COMPILE_TEST
help
This V4L2 driver enables DELTA multi-format video decoder
of STMicroelectronics STiH4xx SoC series allowing hardware
decoding of various compressed video bitstream format in
raw uncompressed format.
Use this option to see the decoders available for such
hardware.
Please notice that the driver will only be built if
at least one of the DELTA decoder below is selected.
if VIDEO_STI_DELTA
config VIDEO_STI_DELTA_MJPEG
bool "STMicroelectronics DELTA MJPEG support"
default y
help
Enables DELTA MJPEG hardware support.
To compile this driver as a module, choose M here:
the module will be called st-delta.
config VIDEO_STI_DELTA_DRIVER
tristate
depends on VIDEO_STI_DELTA
depends on VIDEO_STI_DELTA_MJPEG
default VIDEO_STI_DELTA_MJPEG
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select RPMSG
endif # VIDEO_STI_DELTA
config VIDEO_RENESAS_FDP1
tristate "Renesas Fine Display Processor"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_RENESAS || COMPILE_TEST
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
This is a V4L2 driver for the Renesas Fine Display Processor
providing colour space conversion, and de-interlacing features.
To compile this driver as a module, choose M here: the module
will be called rcar_fdp1.
config VIDEO_RENESAS_JPU
tristate "Renesas JPEG Processing Unit"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_RENESAS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
This is a V4L2 driver for the Renesas JPEG Processing Unit.
To compile this driver as a module, choose M here: the module
will be called rcar_jpu.
config VIDEO_RENESAS_FCP
tristate "Renesas Frame Compression Processor"
depends on ARCH_RENESAS || COMPILE_TEST
depends on OF
help
This is a driver for the Renesas Frame Compression Processor (FCP).
The FCP is a companion module of video processing modules in the
Renesas R-Car Gen3 and RZ/G2 SoCs. It handles memory access for
the codec, VSP and FDP modules.
To compile this driver as a module, choose M here: the module
will be called rcar-fcp.
config VIDEO_RENESAS_VSP1
tristate "Renesas VSP1 Video Processing Engine"
depends on VIDEO_V4L2
depends on ARCH_RENESAS || COMPILE_TEST
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_VMALLOC
help
This is a V4L2 driver for the Renesas VSP1 video processing engine.
To compile this driver as a module, choose M here: the module
will be called vsp1.
config VIDEO_ROCKCHIP_RGA
tristate "Rockchip Raster 2d Graphic Acceleration Unit"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_ROCKCHIP || COMPILE_TEST
select VIDEOBUF2_DMA_SG
select V4L2_MEM2MEM_DEV
help
This is a v4l2 driver for Rockchip SOC RGA 2d graphics accelerator.
Rockchip RGA is a separate 2D raster graphic acceleration unit.
It accelerates 2D graphics operations, such as point/line drawing,
image scaling, rotation, BitBLT, alpha blending and image blur/sharpness.
To compile this driver as a module choose m here.
config VIDEO_TI_VPE
tristate "TI VPE (Video Processing Engine) driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on SOC_DRA7XX || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select VIDEO_TI_VPDMA
select VIDEO_TI_SC
select VIDEO_TI_CSC
help
Support for the TI VPE(Video Processing Engine) block
found on DRA7XX SoC.
config VIDEO_TI_VPE_DEBUG
bool "VPE debug messages"
depends on VIDEO_TI_VPE
help
Enable debug messages on VPE driver.
config VIDEO_QCOM_VENUS
tristate "Qualcomm Venus V4L2 encoder/decoder driver"
depends on VIDEO_DEV && VIDEO_V4L2 && QCOM_SMEM
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
select QCOM_MDT_LOADER if ARCH_QCOM
select QCOM_SCM
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
This is a V4L2 driver for Qualcomm Venus video accelerator
hardware. It accelerates encoding and decoding operations
on various Qualcomm SoCs.
To compile this driver as a module choose m here.
config VIDEO_SUN8I_DEINTERLACE
tristate "Allwinner Deinterlace driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_SUNXI || COMPILE_TEST
depends on COMMON_CLK && OF
depends on PM
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
Support for the Allwinner deinterlace unit with scaling
capability found on some SoCs, like H3.
To compile this driver as a module choose m here.
config VIDEO_SUN8I_ROTATE
tristate "Allwinner DE2 rotation driver"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_SUNXI || COMPILE_TEST
depends on COMMON_CLK && OF
depends on PM
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
Support for the Allwinner DE2 rotation unit.
To compile this driver as a module choose m here.
endif # V4L_MEM2MEM_DRIVERS
# TI VIDEO PORT Helper Modules
# These will be selected by VPE and VIP
config VIDEO_TI_VPDMA
tristate
config VIDEO_TI_SC
tristate
config VIDEO_TI_CSC
tristate
menuconfig DVB_PLATFORM_DRIVERS
bool "DVB platform devices"
depends on MEDIA_DIGITAL_TV_SUPPORT
help
Say Y here to enable support for platform-specific Digital TV drivers.
if DVB_PLATFORM_DRIVERS
source "drivers/media/platform/sti/c8sectpfe/Kconfig"
endif #DVB_PLATFORM_DRIVERS
menuconfig SDR_PLATFORM_DRIVERS
bool "SDR platform devices"
depends on MEDIA_SDR_SUPPORT
help
Say Y here to enable support for platform-specific SDR Drivers.
if SDR_PLATFORM_DRIVERS
config VIDEO_RCAR_DRIF
tristate "Renesas Digital Radio Interface (DRIF)"
depends on VIDEO_V4L2
depends on ARCH_RENESAS || COMPILE_TEST
select VIDEOBUF2_VMALLOC
help
Say Y if you want to enable R-Car Gen3 DRIF support. DRIF is Digital
Radio Interface that interfaces with an RF front end chip. It is a
receiver of digital data which uses DMA to transfer received data to
a configured location for an application to use.
To compile this driver as a module, choose M here; the module
will be called rcar_drif.
endif # SDR_PLATFORM_DRIVERS
|