Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 18.218.219.11
# SPDX-License-Identifier: GPL-2.0-only
#
# QCOM Soc drivers
#
menu "Qualcomm SoC drivers"
config QCOM_AOSS_QMP
tristate "Qualcomm AOSS Driver"
depends on ARCH_QCOM || COMPILE_TEST
depends on MAILBOX
depends on COMMON_CLK && PM
select PM_GENERIC_DOMAINS
help
This driver provides the means of communicating with and controlling
the low-power state for resources related to the remoteproc
subsystems as well as controlling the debug clocks exposed by the Always On
Subsystem (AOSS) using Qualcomm Messaging Protocol (QMP).
config QCOM_COMMAND_DB
tristate "Qualcomm Command DB"
depends on ARCH_QCOM || COMPILE_TEST
depends on OF_RESERVED_MEM
help
Command DB queries shared memory by key string for shared system
resources. Platform drivers that require to set state of a shared
resource on a RPM-hardened platform must use this database to get
SoC specific identifier and information for the shared resources.
config QCOM_CPR
tristate "QCOM Core Power Reduction (CPR) support"
depends on ARCH_QCOM && HAS_IOMEM
select PM_OPP
select REGMAP
help
Say Y here to enable support for the CPR hardware found on Qualcomm
SoCs like QCS404.
This driver populates CPU OPPs tables and makes adjustments to the
tables based on feedback from the CPR hardware. If you want to do
CPUfrequency scaling say Y here.
To compile this driver as a module, choose M here: the module will
be called qcom-cpr
config QCOM_GENI_SE
tristate "QCOM GENI Serial Engine Driver"
depends on ARCH_QCOM || COMPILE_TEST
help
This driver is used to manage Generic Interface (GENI) firmware based
Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This
driver is also used to manage the common aspects of multiple Serial
Engines present in the QUP.
config QCOM_GSBI
tristate "QCOM General Serial Bus Interface"
depends on ARCH_QCOM || COMPILE_TEST
select MFD_SYSCON
help
Say y here to enable GSBI support. The GSBI provides control
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
config QCOM_LLCC
tristate "Qualcomm Technologies, Inc. LLCC driver"
depends on ARCH_QCOM || COMPILE_TEST
select REGMAP_MMIO
help
Qualcomm Technologies, Inc. platform specific
Last Level Cache Controller(LLCC) driver for platforms such as,
SDM845. This provides interfaces to clients that use the LLCC.
Say yes here to enable LLCC slice driver.
config QCOM_KRYO_L2_ACCESSORS
bool
depends on ARCH_QCOM && ARM64 || COMPILE_TEST
config QCOM_MDT_LOADER
tristate
select QCOM_SCM
config QCOM_OCMEM
tristate "Qualcomm On Chip Memory (OCMEM) driver"
depends on ARCH_QCOM
select QCOM_SCM
help
The On Chip Memory (OCMEM) allocator allows various clients to
allocate memory from OCMEM based on performance, latency and power
requirements. This is typically used by the GPU, camera/video, and
audio components on some Snapdragon SoCs.
config QCOM_PDR_HELPERS
tristate
select QCOM_QMI_HELPERS
config QCOM_QMI_HELPERS
tristate
depends on NET
config QCOM_RMTFS_MEM
tristate "Qualcomm Remote Filesystem memory driver"
depends on ARCH_QCOM
select QCOM_SCM
help
The Qualcomm remote filesystem memory driver is used for allocating
and exposing regions of shared memory with remote processors for the
purpose of exchanging sector-data between the remote filesystem
service and its clients.
Say y here if you intend to boot the modem remoteproc.
config QCOM_RPMH
tristate "Qualcomm RPM-Hardened (RPMH) Communication"
depends on ARCH_QCOM || COMPILE_TEST
depends on (QCOM_COMMAND_DB || !QCOM_COMMAND_DB)
help
Support for communication with the hardened-RPM blocks in
Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
internal bus to transmit state requests for shared resources. A set
of hardware components aggregate requests for these resources and
help apply the aggregated state on the resource.
config QCOM_RPMHPD
tristate "Qualcomm RPMh Power domain driver"
depends on QCOM_RPMH && QCOM_COMMAND_DB
help
QCOM RPMh Power domain driver to support power-domains with
performance states. The driver communicates a performance state
value to RPMh which then translates it into corresponding voltage
for the voltage rail.
config QCOM_RPMPD
tristate "Qualcomm RPM Power domain driver"
depends on PM
depends on QCOM_SMD_RPM
help
QCOM RPM Power domain driver to support power-domains with
performance states. The driver communicates a performance state
value to RPM which then translates it into corresponding voltage
for the voltage rail.
config QCOM_SMEM
tristate "Qualcomm Shared Memory Manager (SMEM)"
depends on ARCH_QCOM || COMPILE_TEST
depends on HWSPINLOCK
help
Say y here to enable support for the Qualcomm Shared Memory Manager.
The driver provides an interface to items in a heap shared among all
processors in a Qualcomm platform.
config QCOM_SMD_RPM
tristate "Qualcomm Resource Power Manager (RPM) over SMD"
depends on ARCH_QCOM || COMPILE_TEST
depends on RPMSG
help
If you say yes to this option, support will be included for the
Resource Power Manager system found in the Qualcomm 8974 based
devices.
This is required to access many regulators, clocks and bus
frequencies controlled by the RPM on these devices.
Say M here if you want to include support for the Qualcomm RPM as a
module. This will build a module called "qcom-smd-rpm".
config QCOM_SMEM_STATE
bool
config QCOM_SMP2P
tristate "Qualcomm Shared Memory Point to Point support"
depends on MAILBOX
depends on QCOM_SMEM
select QCOM_SMEM_STATE
select IRQ_DOMAIN
help
Say yes here to support the Qualcomm Shared Memory Point to Point
protocol.
config QCOM_SMSM
tristate "Qualcomm Shared Memory State Machine"
depends on QCOM_SMEM
select QCOM_SMEM_STATE
select IRQ_DOMAIN
help
Say yes here to support the Qualcomm Shared Memory State Machine.
The state machine is represented by bits in shared memory.
config QCOM_SOCINFO
tristate "Qualcomm socinfo driver"
depends on QCOM_SMEM
select SOC_BUS
help
Say yes here to support the Qualcomm socinfo driver, providing
information about the SoC to user space.
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM || COMPILE_TEST
depends on RPMSG
help
Client driver for the WCNSS_CTRL SMD channel, used to download nv
firmware to a newly booted WCNSS chip.
config QCOM_APR
tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
depends on ARCH_QCOM || COMPILE_TEST
depends on RPMSG
depends on NET
select QCOM_PDR_HELPERS
help
Enable APR IPC protocol support between
application processor and QDSP6. APR is
used by audio driver to configure QDSP6
ASM, ADM and AFE modules.
endmenu
|