Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 3.143.237.203
# -*- test-case-name: twisted.internet.test -*-
# Copyright (c) Twisted Matrix Laboratories.
# See LICENSE for details.
"""
This module provides base support for Twisted to interact with the glib/gtk
mainloops.
The classes in this module should not be used directly, but rather you should
import gireactor or gtk3reactor for GObject Introspection based applications,
or glib2reactor or gtk2reactor for applications using legacy static bindings.
"""
import sys
from zope.interface import implementer
from twisted.internet import base, posixbase, selectreactor
from twisted.internet.interfaces import IReactorFDSet
from twisted.python import log
def ensureNotImported(moduleNames, errorMessage, preventImports=[]):
"""
Check whether the given modules were imported, and if requested, ensure
they will not be importable in the future.
@param moduleNames: A list of module names we make sure aren't imported.
@type moduleNames: C{list} of C{str}
@param preventImports: A list of module name whose future imports should
be prevented.
@type preventImports: C{list} of C{str}
@param errorMessage: Message to use when raising an C{ImportError}.
@type errorMessage: C{str}
@raise ImportError: with given error message if a given module name
has already been imported.
"""
for name in moduleNames:
if sys.modules.get(name) is not None:
raise ImportError(errorMessage)
# Disable module imports to avoid potential problems.
for name in preventImports:
sys.modules[name] = None
class GlibWaker(posixbase._UnixWaker):
"""
Run scheduled events after waking up.
"""
def doRead(self):
posixbase._UnixWaker.doRead(self)
self.reactor._simulate()
@implementer(IReactorFDSet)
class GlibReactorBase(posixbase.PosixReactorBase, posixbase._PollLikeMixin):
"""
Base class for GObject event loop reactors.
Notification for I/O events (reads and writes on file descriptors) is done
by the gobject-based event loop. File descriptors are registered with
gobject with the appropriate flags for read/write/disconnect notification.
Time-based events, the results of C{callLater} and C{callFromThread}, are
handled differently. Rather than registering each event with gobject, a
single gobject timeout is registered for the earliest scheduled event, the
output of C{reactor.timeout()}. For example, if there are timeouts in 1, 2
and 3.4 seconds, a single timeout is registered for 1 second in the
future. When this timeout is hit, C{_simulate} is called, which calls the
appropriate Twisted-level handlers, and a new timeout is added to gobject
by the C{_reschedule} method.
To handle C{callFromThread} events, we use a custom waker that calls
C{_simulate} whenever it wakes up.
@ivar _sources: A dictionary mapping L{FileDescriptor} instances to
GSource handles.
@ivar _reads: A set of L{FileDescriptor} instances currently monitored for
reading.
@ivar _writes: A set of L{FileDescriptor} instances currently monitored for
writing.
@ivar _simtag: A GSource handle for the next L{simulate} call.
"""
# Install a waker that knows it needs to call C{_simulate} in order to run
# callbacks queued from a thread:
_wakerFactory = GlibWaker
def __init__(self, glib_module, gtk_module, useGtk=False):
self._simtag = None
self._reads = set()
self._writes = set()
self._sources = {}
self._glib = glib_module
self._gtk = gtk_module
posixbase.PosixReactorBase.__init__(self)
self._source_remove = self._glib.source_remove
self._timeout_add = self._glib.timeout_add
def _mainquit():
if self._gtk.main_level():
self._gtk.main_quit()
if useGtk:
self._pending = self._gtk.events_pending
self._iteration = self._gtk.main_iteration_do
self._crash = _mainquit
self._run = self._gtk.main
else:
self.context = self._glib.main_context_default()
self._pending = self.context.pending
self._iteration = self.context.iteration
self.loop = self._glib.MainLoop()
self._crash = lambda: self._glib.idle_add(self.loop.quit)
self._run = self.loop.run
def _handleSignals(self):
# First, install SIGINT and friends:
base._SignalReactorMixin._handleSignals(self)
# Next, since certain versions of gtk will clobber our signal handler,
# set all signal handlers again after the event loop has started to
# ensure they're *really* set. We don't call this twice so we don't
# leak file descriptors created in the SIGCHLD initialization:
self.callLater(0, posixbase.PosixReactorBase._handleSignals, self)
# The input_add function in pygtk1 checks for objects with a
# 'fileno' method and, if present, uses the result of that method
# as the input source. The pygtk2 input_add does not do this. The
# function below replicates the pygtk1 functionality.
# In addition, pygtk maps gtk.input_add to _gobject.io_add_watch, and
# g_io_add_watch() takes different condition bitfields than
# gtk_input_add(). We use g_io_add_watch() here in case pygtk fixes this
# bug.
def input_add(self, source, condition, callback):
if hasattr(source, "fileno"):
# handle python objects
def wrapper(ignored, condition):
return callback(source, condition)
fileno = source.fileno()
else:
fileno = source
wrapper = callback
return self._glib.io_add_watch(
fileno, condition, wrapper, priority=self._glib.PRIORITY_DEFAULT_IDLE
)
def _ioEventCallback(self, source, condition):
"""
Called by event loop when an I/O event occurs.
"""
log.callWithLogger(source, self._doReadOrWrite, source, source, condition)
return True # True = don't auto-remove the source
def _add(self, source, primary, other, primaryFlag, otherFlag):
"""
Add the given L{FileDescriptor} for monitoring either for reading or
writing. If the file is already monitored for the other operation, we
delete the previous registration and re-register it for both reading
and writing.
"""
if source in primary:
return
flags = primaryFlag
if source in other:
self._source_remove(self._sources[source])
flags |= otherFlag
self._sources[source] = self.input_add(source, flags, self._ioEventCallback)
primary.add(source)
def addReader(self, reader):
"""
Add a L{FileDescriptor} for monitoring of data available to read.
"""
self._add(reader, self._reads, self._writes, self.INFLAGS, self.OUTFLAGS)
def addWriter(self, writer):
"""
Add a L{FileDescriptor} for monitoring ability to write data.
"""
self._add(writer, self._writes, self._reads, self.OUTFLAGS, self.INFLAGS)
def getReaders(self):
"""
Retrieve the list of current L{FileDescriptor} monitored for reading.
"""
return list(self._reads)
def getWriters(self):
"""
Retrieve the list of current L{FileDescriptor} monitored for writing.
"""
return list(self._writes)
def removeAll(self):
"""
Remove monitoring for all registered L{FileDescriptor}s.
"""
return self._removeAll(self._reads, self._writes)
def _remove(self, source, primary, other, flags):
"""
Remove monitoring the given L{FileDescriptor} for either reading or
writing. If it's still monitored for the other operation, we
re-register the L{FileDescriptor} for only that operation.
"""
if source not in primary:
return
self._source_remove(self._sources[source])
primary.remove(source)
if source in other:
self._sources[source] = self.input_add(source, flags, self._ioEventCallback)
else:
self._sources.pop(source)
def removeReader(self, reader):
"""
Stop monitoring the given L{FileDescriptor} for reading.
"""
self._remove(reader, self._reads, self._writes, self.OUTFLAGS)
def removeWriter(self, writer):
"""
Stop monitoring the given L{FileDescriptor} for writing.
"""
self._remove(writer, self._writes, self._reads, self.INFLAGS)
def iterate(self, delay=0):
"""
One iteration of the event loop, for trial's use.
This is not used for actual reactor runs.
"""
self.runUntilCurrent()
while self._pending():
self._iteration(0)
def crash(self):
"""
Crash the reactor.
"""
posixbase.PosixReactorBase.crash(self)
self._crash()
def stop(self):
"""
Stop the reactor.
"""
posixbase.PosixReactorBase.stop(self)
# The base implementation only sets a flag, to ensure shutting down is
# not reentrant. Unfortunately, this flag is not meaningful to the
# gobject event loop. We therefore call wakeUp() to ensure the event
# loop will call back into Twisted once this iteration is done. This
# will result in self.runUntilCurrent() being called, where the stop
# flag will trigger the actual shutdown process, eventually calling
# crash() which will do the actual gobject event loop shutdown.
self.wakeUp()
def run(self, installSignalHandlers=True):
"""
Run the reactor.
"""
self.callWhenRunning(self._reschedule)
self.startRunning(installSignalHandlers=installSignalHandlers)
if self._started:
self._run()
def callLater(self, *args, **kwargs):
"""
Schedule a C{DelayedCall}.
"""
result = posixbase.PosixReactorBase.callLater(self, *args, **kwargs)
# Make sure we'll get woken up at correct time to handle this new
# scheduled call:
self._reschedule()
return result
def _reschedule(self):
"""
Schedule a glib timeout for C{_simulate}.
"""
if self._simtag is not None:
self._source_remove(self._simtag)
self._simtag = None
timeout = self.timeout()
if timeout is not None:
self._simtag = self._timeout_add(
int(timeout * 1000),
self._simulate,
priority=self._glib.PRIORITY_DEFAULT_IDLE,
)
def _simulate(self):
"""
Run timers, and then reschedule glib timeout for next scheduled event.
"""
self.runUntilCurrent()
self._reschedule()
class PortableGlibReactorBase(selectreactor.SelectReactor):
"""
Base class for GObject event loop reactors that works on Windows.
Sockets aren't supported by GObject's input_add on Win32.
"""
def __init__(self, glib_module, gtk_module, useGtk=False):
self._simtag = None
self._glib = glib_module
self._gtk = gtk_module
selectreactor.SelectReactor.__init__(self)
self._source_remove = self._glib.source_remove
self._timeout_add = self._glib.timeout_add
def _mainquit():
if self._gtk.main_level():
self._gtk.main_quit()
if useGtk:
self._crash = _mainquit
self._run = self._gtk.main
else:
self.loop = self._glib.MainLoop()
self._crash = lambda: self._glib.idle_add(self.loop.quit)
self._run = self.loop.run
def crash(self):
selectreactor.SelectReactor.crash(self)
self._crash()
def run(self, installSignalHandlers=True):
self.startRunning(installSignalHandlers=installSignalHandlers)
self._timeout_add(0, self.simulate)
if self._started:
self._run()
def simulate(self):
"""
Run simulation loops and reschedule callbacks.
"""
if self._simtag is not None:
self._source_remove(self._simtag)
self.iterate()
timeout = min(self.timeout(), 0.01)
if timeout is None:
timeout = 0.01
self._simtag = self._timeout_add(
int(timeout * 1000),
self.simulate,
priority=self._glib.PRIORITY_DEFAULT_IDLE,
)
|