Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 18.218.1.38
/*
* Copyright (C) 1999-2018 D. Gilbert
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* SPDX-License-Identifier: GPL-2.0-or-later
*
* Test code for D. Gilbert's extensions to the Linux OS SCSI generic ("sg")
* device driver.
* This program does a SCSI inquiry command on the given device and
* outputs some of the result. This program highlights the use of the
* SCSI_IOCTL_SEND_COMMAND ioctl. This should be able to be applied to
* any SCSI device file descriptor (not just one related to sg). [Whether
* this is a good idea on a disk while it is mounted is debatable.
* No detrimental effects when this was tested ...]
*
* Version 0.16 20181207
*/
#include <unistd.h>
#include <signal.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <scsi/scsi.h>
/* #include <scsi/scsi_ioctl.h> */ /* glibc hides this file sometimes */
typedef struct my_scsi_ioctl_command {
unsigned int inlen; /* _excluding_ scsi command length */
unsigned int outlen;
unsigned char data[1]; /* was 0 but that's not ISO C!! */
/* on input, scsi command starts here then opt. data */
} My_Scsi_Ioctl_Command;
#define OFF (2 * sizeof(unsigned int))
#ifndef SCSI_IOCTL_SEND_COMMAND
#define SCSI_IOCTL_SEND_COMMAND 1
#endif
#define INQUIRY_CMD 0x12
#define INQUIRY_CMDLEN 6
#define INQUIRY_REPLY_LEN 96
int main(int argc, char * argv[])
{
int s_fd, res, k, to;
unsigned char inq_cdb [INQUIRY_CMDLEN] = {INQUIRY_CMD, 0, 0, 0,
INQUIRY_REPLY_LEN, 0};
unsigned char * inqBuff = (unsigned char *)
malloc(OFF + sizeof(inq_cdb) + 512);
unsigned char * buffp = inqBuff + OFF;
My_Scsi_Ioctl_Command * ishp = (My_Scsi_Ioctl_Command *)inqBuff;
char * file_name = 0;
int do_nonblock = 0;
int oflags = 0;
for (k = 1; k < argc; ++k) {
if (0 == strcmp(argv[k], "-n"))
do_nonblock = 1;
else if (*argv[k] != '-')
file_name = argv[k];
else {
printf("Unrecognized argument '%s'\n", argv[k]);
file_name = 0;
break;
}
}
if (0 == file_name) {
printf("Usage: 'scsi_inquiry [-n] <scsi_device>'\n");
printf(" where: -n open device in non-blocking mode\n");
printf(" Examples: scsi_inquiry /dev/sda\n");
printf(" scsi_inquiry /dev/sg0\n");
printf(" scsi_inquiry -n /dev/scd0\n");
return 1;
}
if (do_nonblock)
oflags = O_NONBLOCK;
s_fd = open(file_name, oflags | O_RDWR);
if (s_fd < 0) {
if ((EROFS == errno) || (EACCES == errno)) {
s_fd = open(file_name, oflags | O_RDONLY);
if (s_fd < 0) {
perror("scsi_inquiry: open error");
return 1;
}
}
else {
perror("scsi_inquiry: open error");
return 1;
}
}
/* Don't worry, being very careful not to write to a none-scsi file ... */
res = ioctl(s_fd, SCSI_IOCTL_GET_BUS_NUMBER, &to);
if (res < 0) {
/* perror("ioctl on scsi device, error"); */
printf("scsi_inquiry: not a scsi device\n");
return 1;
}
ishp->inlen = 0;
ishp->outlen = INQUIRY_REPLY_LEN;
memcpy(buffp, inq_cdb, INQUIRY_CMDLEN);
res = ioctl(s_fd, SCSI_IOCTL_SEND_COMMAND, inqBuff);
if (0 == res) {
to = (int)*(buffp + 7);
printf(" %.8s %.16s %.4s, byte_7=0x%x\n", buffp + 8,
buffp + 16, buffp + 32, to);
}
else if (res < 0)
perror("scsi_inquiry: SCSI_IOCTL_SEND_COMMAND err");
else
printf("scsi_inquiry: SCSI_IOCTL_SEND_COMMAND status=0x%x\n", res);
res = close(s_fd);
if (res < 0) {
perror("scsi_inquiry: close error");
return 1;
}
return 0;
}
|