Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 3.145.40.234
#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include "sg_linux_inc.h"
/* This is a simple program executing a SCSI INQUIRY command and a
TEST UNIT READY command using the SCSI generic (sg) driver.
There is another variant of this program called "sg_simple1"
which includes the sg_lib.h header and logic and so has more
advanced error processing.
This version demonstrates the "sg3" interface.
In the lk 2.6 series devices nodes such as /dev/sda also support
the SG_IO ioctl.
* Copyright (C) 1999-2016 D. Gilbert
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
Invocation: sg_simple2 [-x] <scsi_device>
Version 03.59 (20160528)
6 byte INQUIRY command:
[0x12][ |lu][pg cde][res ][al len][cntrl ]
6 byte TEST UNIT READY command:
[0x00][ |lu][res ][res ][res ][res ]
*/
#define INQ_REPLY_LEN 96 /* logic assumes >= sizeof(inq_cdb) */
#define INQ_CMD_LEN 6
#define TUR_CMD_LEN 6
#define EBUFF_SZ 256
int main(int argc, char * argv[])
{
int sg_fd, k;
unsigned char inq_cdb[INQ_CMD_LEN] =
{0x12, 0, 0, 0, INQ_REPLY_LEN, 0};
unsigned char tur_cdb[TUR_CMD_LEN] =
{0x00, 0, 0, 0, 0, 0};
unsigned char inqBuff[INQ_REPLY_LEN];
sg_io_hdr_t io_hdr;
char * file_name = 0;
char ebuff[EBUFF_SZ];
unsigned char sense_buffer[32];
int do_extra = 0;
for (k = 1; k < argc; ++k) {
if (0 == memcmp("-x", argv[k], 2))
do_extra = 1;
else if (*argv[k] == '-') {
printf("Unrecognized switch: %s\n", argv[k]);
file_name = 0;
break;
}
else if (0 == file_name)
file_name = argv[k];
else {
printf("too many arguments\n");
file_name = 0;
break;
}
}
if (0 == file_name) {
printf("Usage: 'sg_simple2 [-x] <sg_device>'\n");
return 1;
}
/* N.B. An access mode of O_RDWR is required for some SCSI commands */
if ((sg_fd = open(file_name, O_RDONLY)) < 0) {
snprintf(ebuff, EBUFF_SZ,
"sg_simple2: error opening file: %s", file_name);
perror(ebuff);
return 1;
}
/* Just to be safe, check we have a new sg device by trying an ioctl */
if ((ioctl(sg_fd, SG_GET_VERSION_NUM, &k) < 0) || (k < 30000)) {
printf("sg_simple2: %s doesn't seem to be an new sg device\n",
file_name);
close(sg_fd);
return 1;
}
/* Prepare INQUIRY command */
memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
io_hdr.interface_id = 'S';
io_hdr.cmd_len = sizeof(inq_cdb);
/* io_hdr.iovec_count = 0; */ /* memset takes care of this */
io_hdr.mx_sb_len = sizeof(sense_buffer);
io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
io_hdr.dxfer_len = INQ_REPLY_LEN;
io_hdr.dxferp = inqBuff;
io_hdr.cmdp = inq_cdb;
io_hdr.sbp = sense_buffer;
io_hdr.timeout = 20000; /* 20000 millisecs == 20 seconds */
/* io_hdr.flags = 0; */ /* take defaults: indirect IO, etc */
/* io_hdr.pack_id = 0; */
/* io_hdr.usr_ptr = NULL; */
if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) {
perror("sg_simple2: Inquiry SG_IO ioctl error");
close(sg_fd);
return 1;
}
/* now for the error processing */
if ((io_hdr.info & SG_INFO_OK_MASK) != SG_INFO_OK) {
if (io_hdr.sb_len_wr > 0) {
printf("INQUIRY sense data: ");
for (k = 0; k < io_hdr.sb_len_wr; ++k) {
if ((k > 0) && (0 == (k % 10)))
printf("\n ");
printf("0x%02x ", sense_buffer[k]);
}
printf("\n");
}
if (io_hdr.masked_status)
printf("INQUIRY SCSI status=0x%x\n", io_hdr.status);
if (io_hdr.host_status)
printf("INQUIRY host_status=0x%x\n", io_hdr.host_status);
if (io_hdr.driver_status)
printf("INQUIRY driver_status=0x%x\n", io_hdr.driver_status);
}
else { /* output result if it is available */
char * p = (char *)inqBuff;
int f = (int)*(p + 7);
printf("Some of the INQUIRY command's results:\n");
printf(" %.8s %.16s %.4s ", p + 8, p + 16, p + 32);
printf("[wide=%d sync=%d cmdque=%d sftre=%d]\n",
!!(f & 0x20), !!(f & 0x10), !!(f & 2), !!(f & 1));
}
/* Extra info, not necessary to look at */
if (do_extra)
printf("INQUIRY duration=%u millisecs, resid=%d, msg_status=%d\n",
io_hdr.duration, io_hdr.resid, (int)io_hdr.msg_status);
/* Prepare TEST UNIT READY command */
memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
io_hdr.interface_id = 'S';
io_hdr.cmd_len = sizeof(tur_cdb);
io_hdr.mx_sb_len = sizeof(sense_buffer);
io_hdr.dxfer_direction = SG_DXFER_NONE;
io_hdr.cmdp = tur_cdb;
io_hdr.sbp = sense_buffer;
io_hdr.timeout = 20000; /* 20000 millisecs == 20 seconds */
if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) {
perror("sg_simple2: Test Unit Ready SG_IO ioctl error");
close(sg_fd);
return 1;
}
/* now for the error processing */
if ((io_hdr.info & SG_INFO_OK_MASK) != SG_INFO_OK) {
if (io_hdr.sb_len_wr > 0) {
printf("TEST UNIT READY sense data: ");
for (k = 0; k < io_hdr.sb_len_wr; ++k) {
if ((k > 0) && (0 == (k % 10)))
printf("\n ");
printf("0x%02x ", sense_buffer[k]);
}
printf("\n");
}
else if (io_hdr.masked_status)
printf("TEST UNIT READY SCSI status=0x%x\n", io_hdr.status);
else if (io_hdr.host_status)
printf("TEST UNIT READY host_status=0x%x\n", io_hdr.host_status);
else if (io_hdr.driver_status)
printf("TEST UNIT READY driver_status=0x%x\n",
io_hdr.driver_status);
else
printf("TEST UNIT READY unexpected error\n");
printf("Test Unit Ready failed so unit may _not_ be ready!\n");
}
else
printf("Test Unit Ready successful so unit is ready!\n");
/* Extra info, not necessary to look at */
if (do_extra)
printf("TEST UNIT READY duration=%u millisecs, resid=%d, "
"msg_status=%d\n", io_hdr.duration, io_hdr.resid,
(int)io_hdr.msg_status);
close(sg_fd);
return 0;
}
|