Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 18.225.156.91
#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include "sg_lib.h"
#include "sg_io_linux.h"
/* This is a simple program executing a SCSI INQUIRY command and a
TEST UNIT READY command using the SCSI generic (sg) driver.
There is another variant of this program called "sg_simple1".
This variant demonstrates using the scatter gather facility in
the sg_io_hdr interface to break an INQUIRY response into its
component parts.
* Copyright (C) 1999-2016 D. Gilbert
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
Invocation: sg_simple3 [-x] <sg_device>
Version 03.59 (20160528)
6 byte INQUIRY command:
[0x12][ |lu][pg cde][res ][al len][cntrl ]
6 byte TEST UNIT READY command:
[0x00][ |lu][res ][res ][res ][res ]
*/
#define INQ_REPLY_BASE_LEN 8
#define INQ_REPLY_VID_LEN 8
#define INQ_REPLY_PID_LEN 16
#define INQ_REPLY_PREV_LEN 4
#define INQ_REPLY_IOVEC_COUNT 4
#define INQ_CMD_LEN 6
#define TUR_CMD_LEN 6
#define EBUFF_SZ 256
int main(int argc, char * argv[])
{
int sg_fd, k, ok;
unsigned char inq_cdb[INQ_CMD_LEN] = {0x12, 0, 0, 0,
INQ_REPLY_BASE_LEN + INQ_REPLY_VID_LEN +
INQ_REPLY_PID_LEN + INQ_REPLY_PREV_LEN, 0};
unsigned char tur_cdb[TUR_CMD_LEN] = {0x00, 0, 0, 0, 0, 0};
sg_iovec_t iovec[INQ_REPLY_IOVEC_COUNT];
unsigned char inqBaseBuff[INQ_REPLY_BASE_LEN];
char inqVidBuff[INQ_REPLY_VID_LEN];
char inqPidBuff[INQ_REPLY_PID_LEN];
char inqPRevBuff[INQ_REPLY_PREV_LEN];
sg_io_hdr_t io_hdr;
char * file_name = 0;
char ebuff[EBUFF_SZ];
unsigned char sense_buffer[32];
int do_extra = 0;
for (k = 1; k < argc; ++k) {
if (0 == memcmp("-x", argv[k], 2))
do_extra = 1;
else if (*argv[k] == '-') {
printf("Unrecognized switch: %s\n", argv[k]);
file_name = 0;
break;
}
else if (0 == file_name)
file_name = argv[k];
else {
printf("too many arguments\n");
file_name = 0;
break;
}
}
if (0 == file_name) {
printf("Usage: 'sg_simple3 [-x] <sg_device>'\n");
return 1;
}
/* N.B. An access mode of O_RDWR is required for some SCSI commands */
if ((sg_fd = open(file_name, O_RDONLY)) < 0) {
snprintf(ebuff, EBUFF_SZ,
"sg_simple3: error opening file: %s", file_name);
perror(ebuff);
return 1;
}
/* Just to be safe, check we have a new sg device by trying an ioctl */
if ((ioctl(sg_fd, SG_GET_VERSION_NUM, &k) < 0) || (k < 30000)) {
printf("sg_simple3: %s doesn't seem to be an new sg device\n",
file_name);
close(sg_fd);
return 1;
}
/* Prepare INQUIRY command */
memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
io_hdr.interface_id = 'S';
io_hdr.cmd_len = sizeof(inq_cdb);
io_hdr.iovec_count = INQ_REPLY_IOVEC_COUNT;
io_hdr.mx_sb_len = sizeof(sense_buffer);
io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
io_hdr.dxfer_len = INQ_REPLY_BASE_LEN + INQ_REPLY_VID_LEN +
INQ_REPLY_PID_LEN + INQ_REPLY_PREV_LEN;
iovec[0].iov_base = inqBaseBuff;
iovec[0].iov_len = INQ_REPLY_BASE_LEN;
iovec[1].iov_base = inqVidBuff;
iovec[1].iov_len = INQ_REPLY_VID_LEN;
iovec[2].iov_base = inqPidBuff;
iovec[2].iov_len = INQ_REPLY_PID_LEN;
iovec[3].iov_base = inqPRevBuff;
iovec[3].iov_len = INQ_REPLY_PREV_LEN;
io_hdr.dxferp = iovec;
io_hdr.cmdp = inq_cdb;
io_hdr.sbp = sense_buffer;
io_hdr.timeout = 20000; /* 20000 millisecs == 20 seconds */
/* io_hdr.flags = 0; */ /* take defaults: indirect IO, etc */
/* io_hdr.pack_id = 0; */
/* io_hdr.usr_ptr = NULL; */
if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) {
perror("sg_simple3: Inquiry SG_IO ioctl error");
close(sg_fd);
return 1;
}
/* now for the error processing */
ok = 0;
switch (sg_err_category3(&io_hdr)) {
case SG_LIB_CAT_CLEAN:
ok = 1;
break;
case SG_LIB_CAT_RECOVERED:
printf("Recovered error on INQUIRY, continuing\n");
ok = 1;
break;
default: /* won't bother decoding other categories */
sg_chk_n_print3("INQUIRY command error", &io_hdr, 1);
break;
}
if (ok) { /* output result if it is available */
char * p = (char *)inqBaseBuff;
int f = (int)*(p + 7);
printf("Some of the INQUIRY command's results:\n");
printf(" %.8s %.16s %.4s ", inqVidBuff, inqPidBuff, inqPRevBuff);
printf("[wide=%d sync=%d cmdque=%d sftre=%d]\n",
!!(f & 0x20), !!(f & 0x10), !!(f & 2), !!(f & 1));
/* Extra info, not necessary to look at */
if (do_extra)
printf("INQUIRY duration=%u millisecs, resid=%d, msg_status=%d\n",
io_hdr.duration, io_hdr.resid, (int)io_hdr.msg_status);
}
/* Prepare TEST UNIT READY command */
memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
io_hdr.interface_id = 'S';
io_hdr.cmd_len = sizeof(tur_cdb);
io_hdr.mx_sb_len = sizeof(sense_buffer);
io_hdr.dxfer_direction = SG_DXFER_NONE;
io_hdr.cmdp = tur_cdb;
io_hdr.sbp = sense_buffer;
io_hdr.timeout = 20000; /* 20000 millisecs == 20 seconds */
if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) {
perror("sg_simple3: Test Unit Ready SG_IO ioctl error");
close(sg_fd);
return 1;
}
/* now for the error processing */
ok = 0;
switch (sg_err_category3(&io_hdr)) {
case SG_LIB_CAT_CLEAN:
ok = 1;
break;
case SG_LIB_CAT_RECOVERED:
printf("Recovered error on Test Unit Ready, continuing\n");
ok = 1;
break;
default: /* won't bother decoding other categories */
sg_chk_n_print3("Test Unit Ready command error", &io_hdr, 1);
break;
}
if (ok)
printf("Test Unit Ready successful so unit is ready!\n");
else
printf("Test Unit Ready failed so unit may _not_ be ready!\n");
if (do_extra)
printf("TEST UNIT READY duration=%u millisecs, resid=%d, "
"msg_status=%d\n", io_hdr.duration, io_hdr.resid,
(int)io_hdr.msg_status);
close(sg_fd);
return 0;
}
|