Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 18.188.114.150
# SPDX-License-Identifier: GPL-2.0-only
#
# Hardware Random Number Generator (RNG) configuration
#
menuconfig HW_RANDOM
tristate "Hardware Random Number Generator Core support"
default m
help
Hardware Random Number Generator Core infrastructure.
To compile this driver as a module, choose M here: the
module will be called rng-core. This provides a device
that's usually called /dev/hwrng, and which exposes one
of possibly several hardware random number generators.
These hardware random number generators do feed into the
kernel's random number generator entropy pool.
If unsure, say Y.
if HW_RANDOM
config HW_RANDOM_TIMERIOMEM
tristate "Timer IOMEM HW Random Number Generator support"
depends on HAS_IOMEM
help
This driver provides kernel-side support for a generic Random
Number Generator used by reading a 'dumb' iomem address that
is to be read no faster than, for example, once a second;
the default FPGA bitstream on the TS-7800 has such functionality.
To compile this driver as a module, choose M here: the
module will be called timeriomem-rng.
If unsure, say Y.
config HW_RANDOM_INTEL
tristate "Intel HW Random Number Generator support"
depends on (X86 || IA64) && PCI
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on Intel i8xx-based motherboards.
To compile this driver as a module, choose M here: the
module will be called intel-rng.
If unsure, say Y.
config HW_RANDOM_AMD
tristate "AMD HW Random Number Generator support"
depends on (X86 || PPC_MAPLE) && PCI
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on AMD 76x-based motherboards.
To compile this driver as a module, choose M here: the
module will be called amd-rng.
If unsure, say Y.
config HW_RANDOM_ATMEL
tristate "Atmel Random Number Generator support"
depends on ARCH_AT91 && HAVE_CLK && OF
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on Atmel AT91 devices.
To compile this driver as a module, choose M here: the
module will be called atmel-rng.
If unsure, say Y.
config HW_RANDOM_BA431
tristate "Silex Insight BA431 Random Number Generator support"
depends on HAS_IOMEM
help
This driver provides kernel-side support for the Random Number
Generator hardware based on Silex Insight BA431 IP.
To compile this driver as a module, choose M here: the
module will be called ba431-rng.
config HW_RANDOM_BCM2835
tristate "Broadcom BCM2835/BCM63xx Random Number Generator support"
depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on the Broadcom BCM2835 and BCM63xx SoCs.
To compile this driver as a module, choose M here: the
module will be called bcm2835-rng
If unsure, say Y.
config HW_RANDOM_IPROC_RNG200
tristate "Broadcom iProc/STB RNG200 support"
depends on ARCH_BCM_IPROC || ARCH_BCM2835 || ARCH_BRCMSTB
default HW_RANDOM
help
This driver provides kernel-side support for the RNG200
hardware found on the Broadcom iProc and STB SoCs.
To compile this driver as a module, choose M here: the
module will be called iproc-rng200
If unsure, say Y.
config HW_RANDOM_GEODE
tristate "AMD Geode HW Random Number Generator support"
depends on X86_32 && PCI
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on the AMD Geode LX.
To compile this driver as a module, choose M here: the
module will be called geode-rng.
If unsure, say Y.
config HW_RANDOM_N2RNG
tristate "Niagara2 Random Number Generator support"
depends on SPARC64
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on Niagara2 cpus.
To compile this driver as a module, choose M here: the
module will be called n2-rng.
If unsure, say Y.
config HW_RANDOM_VIA
tristate "VIA HW Random Number Generator support"
depends on X86
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on VIA based motherboards.
To compile this driver as a module, choose M here: the
module will be called via-rng.
If unsure, say Y.
config HW_RANDOM_IXP4XX
tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support"
depends on ARCH_IXP4XX || COMPILE_TEST
default HW_RANDOM
help
This driver provides kernel-side support for the Pseudo-Random
Number Generator hardware found on the Intel IXP45x/46x NPU.
To compile this driver as a module, choose M here: the
module will be called ixp4xx-rng.
If unsure, say Y.
config HW_RANDOM_OMAP
tristate "OMAP Random Number Generator support"
depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU || ARCH_K3
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on OMAP16xx, OMAP2/3/4/5, AM33xx/AM43xx
multimedia processors, and Marvell Armada 7k/8k SoCs.
To compile this driver as a module, choose M here: the
module will be called omap-rng.
If unsure, say Y.
config HW_RANDOM_OMAP3_ROM
tristate "OMAP3 ROM Random Number Generator support"
depends on ARCH_OMAP3
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on OMAP34xx processors.
To compile this driver as a module, choose M here: the
module will be called omap3-rom-rng.
If unsure, say Y.
config HW_RANDOM_OCTEON
tristate "Octeon Random Number Generator support"
depends on CAVIUM_OCTEON_SOC
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on Octeon processors.
To compile this driver as a module, choose M here: the
module will be called octeon-rng.
If unsure, say Y.
config HW_RANDOM_PASEMI
tristate "PA Semi HW Random Number Generator support"
depends on PPC_PASEMI
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on PA Semi PWRficient SoCs.
To compile this driver as a module, choose M here: the
module will be called pasemi-rng.
If unsure, say Y.
config HW_RANDOM_VIRTIO
tristate "VirtIO Random Number Generator support"
depends on VIRTIO
help
This driver provides kernel-side support for the virtual Random Number
Generator hardware.
To compile this driver as a module, choose M here: the
module will be called virtio-rng. If unsure, say N.
config HW_RANDOM_TX4939
tristate "TX4939 Random Number Generator support"
depends on SOC_TX4939
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on TX4939 SoC.
To compile this driver as a module, choose M here: the
module will be called tx4939-rng.
If unsure, say Y.
config HW_RANDOM_MXC_RNGA
tristate "Freescale i.MX RNGA Random Number Generator"
depends on SOC_IMX31
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on Freescale i.MX processors.
To compile this driver as a module, choose M here: the
module will be called mxc-rnga.
If unsure, say Y.
config HW_RANDOM_IMX_RNGC
tristate "Freescale i.MX RNGC Random Number Generator"
depends on HAS_IOMEM && HAVE_CLK
depends on SOC_IMX25 || SOC_IMX6SL || SOC_IMX6SLL || SOC_IMX6UL || COMPILE_TEST
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator Version C hardware found on some Freescale i.MX
processors. Version B is also supported by this driver.
To compile this driver as a module, choose M here: the
module will be called imx-rngc.
If unsure, say Y.
config HW_RANDOM_INGENIC_RNG
tristate "Ingenic Random Number Generator support"
depends on HW_RANDOM
depends on MACH_JZ4780 || MACH_X1000
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number Generator
hardware found in ingenic JZ4780 and X1000 SoC. MIPS Creator CI20 uses
JZ4780 SoC, YSH & ATIL CU1000-Neo uses X1000 SoC.
To compile this driver as a module, choose M here: the
module will be called ingenic-rng.
If unsure, say Y.
config HW_RANDOM_INGENIC_TRNG
tristate "Ingenic True Random Number Generator support"
depends on HW_RANDOM
depends on MACH_X1830
default HW_RANDOM
help
This driver provides kernel-side support for the True Random Number Generator
hardware found in ingenic X1830 SoC. YSH & ATIL CU1830-Neo uses X1830 SoC.
To compile this driver as a module, choose M here: the
module will be called ingenic-trng.
If unsure, say Y.
config HW_RANDOM_NOMADIK
tristate "ST-Ericsson Nomadik Random Number Generator support"
depends on ARCH_NOMADIK
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on ST-Ericsson SoCs (8815 and 8500).
To compile this driver as a module, choose M here: the
module will be called nomadik-rng.
If unsure, say Y.
config HW_RANDOM_PSERIES
tristate "pSeries HW Random Number Generator support"
depends on PPC64 && IBMVIO
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on POWER7+ machines and above
To compile this driver as a module, choose M here: the
module will be called pseries-rng.
If unsure, say Y.
config HW_RANDOM_POWERNV
tristate "PowerNV Random Number Generator support"
depends on PPC_POWERNV
default HW_RANDOM
help
This is the driver for Random Number Generator hardware found
in POWER7+ and above machines for PowerNV platform.
To compile this driver as a module, choose M here: the
module will be called powernv-rng.
If unsure, say Y.
config HW_RANDOM_HISI
tristate "Hisilicon Random Number Generator support"
depends on HW_RANDOM && ARCH_HISI
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on Hisilicon Hip04 and Hip05 SoC.
To compile this driver as a module, choose M here: the
module will be called hisi-rng.
If unsure, say Y.
config HW_RANDOM_ST
tristate "ST Microelectronics HW Random Number Generator support"
depends on HW_RANDOM && ARCH_STI
help
This driver provides kernel-side support for the Random Number
Generator hardware found on STi series of SoCs.
To compile this driver as a module, choose M here: the
module will be called st-rng.
config HW_RANDOM_XGENE
tristate "APM X-Gene True Random Number Generator (TRNG) support"
depends on HW_RANDOM && ARCH_XGENE
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on APM X-Gene SoC.
To compile this driver as a module, choose M here: the
module will be called xgene_rng.
If unsure, say Y.
config HW_RANDOM_STM32
tristate "STMicroelectronics STM32 random number generator"
depends on HW_RANDOM && (ARCH_STM32 || COMPILE_TEST)
depends on HAS_IOMEM
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on STM32 microcontrollers.
To compile this driver as a module, choose M here: the
module will be called stm32-rng.
If unsure, say N.
config HW_RANDOM_PIC32
tristate "Microchip PIC32 Random Number Generator support"
depends on HW_RANDOM && MACH_PIC32
default y
help
This driver provides kernel-side support for the Random Number
Generator hardware found on a PIC32.
To compile this driver as a module, choose M here. the
module will be called pic32-rng.
If unsure, say Y.
config HW_RANDOM_MESON
tristate "Amlogic Meson Random Number Generator support"
depends on HW_RANDOM
depends on ARCH_MESON || COMPILE_TEST
default y
help
This driver provides kernel-side support for the Random Number
Generator hardware found on Amlogic Meson SoCs.
To compile this driver as a module, choose M here. the
module will be called meson-rng.
If unsure, say Y.
config HW_RANDOM_CAVIUM
tristate "Cavium ThunderX Random Number Generator support"
depends on HW_RANDOM && PCI && ARCH_THUNDER
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
Generator hardware found on Cavium SoCs.
To compile this driver as a module, choose M here: the
module will be called cavium_rng.
If unsure, say Y.
config HW_RANDOM_MTK
tristate "Mediatek Random Number Generator support"
depends on HW_RANDOM
depends on ARCH_MEDIATEK || COMPILE_TEST
default y
help
This driver provides kernel-side support for the Random Number
Generator hardware found on Mediatek SoCs.
To compile this driver as a module, choose M here. the
module will be called mtk-rng.
If unsure, say Y.
config HW_RANDOM_S390
tristate "S390 True Random Number Generator support"
depends on S390
default HW_RANDOM
help
This driver provides kernel-side support for the True
Random Number Generator available as CPACF extension
on modern s390 hardware platforms.
To compile this driver as a module, choose M here: the
module will be called s390-trng.
If unsure, say Y.
config HW_RANDOM_EXYNOS
tristate "Samsung Exynos True Random Number Generator support"
depends on ARCH_EXYNOS || COMPILE_TEST
default HW_RANDOM
help
This driver provides support for the True Random Number
Generator available in Exynos SoCs.
To compile this driver as a module, choose M here: the module
will be called exynos-trng.
If unsure, say Y.
config HW_RANDOM_OPTEE
tristate "OP-TEE based Random Number Generator support"
depends on OPTEE
default HW_RANDOM
help
This driver provides support for OP-TEE based Random Number
Generator on ARM SoCs where hardware entropy sources are not
accessible to normal world (Linux).
To compile this driver as a module, choose M here: the module
will be called optee-rng.
If unsure, say Y.
config HW_RANDOM_NPCM
tristate "NPCM Random Number Generator support"
depends on ARCH_NPCM || COMPILE_TEST
default HW_RANDOM
help
This driver provides support for the Random Number
Generator hardware available in Nuvoton NPCM SoCs.
To compile this driver as a module, choose M here: the
module will be called npcm-rng.
If unsure, say Y.
config HW_RANDOM_KEYSTONE
depends on ARCH_KEYSTONE || COMPILE_TEST
depends on HAS_IOMEM && OF
default HW_RANDOM
tristate "TI Keystone NETCP SA Hardware random number generator"
help
This option enables Keystone's hardware random generator.
config HW_RANDOM_CCTRNG
tristate "Arm CryptoCell True Random Number Generator support"
depends on HAS_IOMEM && OF
help
Say 'Y' to enable the True Random Number Generator driver for the
Arm TrustZone CryptoCell family of processors.
Currently the CryptoCell 713 and 703 are supported.
The driver is supported only in SoC where Trusted Execution
Environment is not used.
Choose 'M' to compile this driver as a module. The module
will be called cctrng.
If unsure, say 'N'.
config HW_RANDOM_XIPHERA
tristate "Xiphera FPGA based True Random Number Generator support"
depends on HAS_IOMEM
help
This driver provides kernel-side support for Xiphera True Random
Number Generator Intellectual Property Core.
To compile this driver as a module, choose M here: the
module will be called xiphera-trng.
config HW_RANDOM_ARM_SMCCC_TRNG
tristate "Arm SMCCC TRNG firmware interface support"
depends on HAVE_ARM_SMCCC_DISCOVERY
default HW_RANDOM
help
Say 'Y' to enable the True Random Number Generator driver using
the Arm SMCCC TRNG firmware interface. This reads entropy from
higher exception levels (firmware, hypervisor). Uses SMCCC for
communicating with the firmware:
https://developer.arm.com/documentation/den0098/latest/
To compile this driver as a module, choose M here: the
module will be called arm_smccc_trng.
endif # HW_RANDOM
config UML_RANDOM
depends on UML
select HW_RANDOM
tristate "UML Random Number Generator support"
help
This option enables UML's "hardware" random number generator. It
attaches itself to the host's /dev/random, supplying as much entropy
as the host has, rather than the small amount the UML gets from its
own drivers. It registers itself as a rng-core driver thus providing
a device which is usually called /dev/hwrng. This hardware random
number generator does feed into the kernel's random number generator
entropy pool.
If unsure, say Y.
|