Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 52.14.219.203
# SPDX-License-Identifier: GPL-2.0-only
menu "IRQ chip support"
config IRQCHIP
def_bool y
depends on OF_IRQ
config ARM_GIC
bool
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config ARM_GIC_PM
bool
depends on PM
select ARM_GIC
config ARM_GIC_MAX_NR
int
depends on ARM_GIC
default 2 if ARCH_REALVIEW
default 1
config ARM_GIC_V2M
bool
depends on PCI
select ARM_GIC
select PCI_MSI
config GIC_NON_BANKED
bool
config ARM_GIC_V3
bool
select IRQ_DOMAIN_HIERARCHY
select PARTITION_PERCPU
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config ARM_GIC_V3_ITS
bool
select GENERIC_MSI_IRQ_DOMAIN
default ARM_GIC_V3
config ARM_GIC_V3_ITS_PCI
bool
depends on ARM_GIC_V3_ITS
depends on PCI
depends on PCI_MSI
default ARM_GIC_V3_ITS
config ARM_GIC_V3_ITS_FSL_MC
bool
depends on ARM_GIC_V3_ITS
depends on FSL_MC_BUS
default ARM_GIC_V3_ITS
config ARM_NVIC
bool
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_CHIP
config ARM_VIC
bool
select IRQ_DOMAIN
config ARM_VIC_NR
int
default 4 if ARCH_S5PV210
default 2
depends on ARM_VIC
help
The maximum number of VICs available in the system, for
power management.
config ARMADA_370_XP_IRQ
bool
select GENERIC_IRQ_CHIP
select PCI_MSI if PCI
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config ALPINE_MSI
bool
depends on PCI
select PCI_MSI
select GENERIC_IRQ_CHIP
config AL_FIC
bool "Amazon's Annapurna Labs Fabric Interrupt Controller"
depends on OF || COMPILE_TEST
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
help
Support Amazon's Annapurna Labs Fabric Interrupt Controller.
config ATMEL_AIC_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select SPARSE_IRQ
config ATMEL_AIC5_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select SPARSE_IRQ
config I8259
bool
select IRQ_DOMAIN
config BCM6345_L1_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config BCM7038_L1_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config BCM7120_L2_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
config BRCMSTB_L2_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
config DAVINCI_AINTC
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
config DAVINCI_CP_INTC
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
config DW_APB_ICTL
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN_HIERARCHY
config FARADAY_FTINTC010
bool
select IRQ_DOMAIN
select SPARSE_IRQ
config HISILICON_IRQ_MBIGEN
bool
select ARM_GIC_V3
select ARM_GIC_V3_ITS
config IMGPDC_IRQ
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
config IXP4XX_IRQ
bool
select IRQ_DOMAIN
select SPARSE_IRQ
config MADERA_IRQ
tristate
config IRQ_MIPS_CPU
bool
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_IPI if SMP && SYS_SUPPORTS_MULTITHREADING
select IRQ_DOMAIN
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config CLPS711X_IRQCHIP
bool
depends on ARCH_CLPS711X
select IRQ_DOMAIN
select SPARSE_IRQ
default y
config OMPIC
bool
config OR1K_PIC
bool
select IRQ_DOMAIN
config OMAP_IRQCHIP
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
config ORION_IRQCHIP
bool
select IRQ_DOMAIN
config PIC32_EVIC
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
config JCORE_AIC
bool "J-Core integrated AIC" if COMPILE_TEST
depends on OF
select IRQ_DOMAIN
help
Support for the J-Core integrated AIC.
config RDA_INTC
bool
select IRQ_DOMAIN
config RENESAS_INTC_IRQPIN
bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
select IRQ_DOMAIN
help
Enable support for the Renesas Interrupt Controller for external
interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
config RENESAS_IRQC
bool "Renesas R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} IRQC support" if COMPILE_TEST
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
help
Enable support for the Renesas Interrupt Controller for external
devices, as found on R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs.
config RENESAS_RZA1_IRQC
bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
select IRQ_DOMAIN_HIERARCHY
help
Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
to 8 external interrupts with configurable sense select.
config SL28CPLD_INTC
bool "Kontron sl28cpld IRQ controller"
depends on MFD_SL28CPLD=y || COMPILE_TEST
select REGMAP_IRQ
help
Interrupt controller driver for the board management controller
found on the Kontron sl28 CPLD.
config ST_IRQCHIP
bool
select REGMAP
select MFD_SYSCON
help
Enables SysCfg Controlled IRQs on STi based platforms.
config TB10X_IRQC
bool
select IRQ_DOMAIN
select GENERIC_IRQ_CHIP
config TS4800_IRQ
tristate "TS-4800 IRQ controller"
select IRQ_DOMAIN
depends on HAS_IOMEM
depends on SOC_IMX51 || COMPILE_TEST
help
Support for the TS-4800 FPGA IRQ controller
config VERSATILE_FPGA_IRQ
bool
select IRQ_DOMAIN
config VERSATILE_FPGA_IRQ_NR
int
default 4
depends on VERSATILE_FPGA_IRQ
config XTENSA_MX
bool
select IRQ_DOMAIN
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config XILINX_INTC
bool "Xilinx Interrupt Controller IP"
depends on MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP
select IRQ_DOMAIN
help
Support for the Xilinx Interrupt Controller IP core.
This is used as a primary controller with MicroBlaze and can also
be used as a secondary chained controller on other platforms.
config IRQ_CROSSBAR
bool
help
Support for a CROSSBAR ip that precedes the main interrupt controller.
The primary irqchip invokes the crossbar's callback which inturn allocates
a free irq and configures the IP. Thus the peripheral interrupts are
routed to one of the free irqchip interrupt lines.
config KEYSTONE_IRQ
tristate "Keystone 2 IRQ controller IP"
depends on ARCH_KEYSTONE
help
Support for Texas Instruments Keystone 2 IRQ controller IP which
is part of the Keystone 2 IPC mechanism
config MIPS_GIC
bool
select GENERIC_IRQ_IPI if SMP
select IRQ_DOMAIN_HIERARCHY
select MIPS_CM
config INGENIC_IRQ
bool
depends on MACH_INGENIC
default y
config INGENIC_TCU_IRQ
bool "Ingenic JZ47xx TCU interrupt controller"
default MACH_INGENIC
depends on MIPS || COMPILE_TEST
select MFD_SYSCON
select GENERIC_IRQ_CHIP
help
Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic
JZ47xx SoCs.
If unsure, say N.
config RENESAS_H8300H_INTC
bool
select IRQ_DOMAIN
config RENESAS_H8S_INTC
bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
select IRQ_DOMAIN
help
Enable support for the Renesas H8/300 Interrupt Controller, as found
on Renesas H8S SoCs.
config IMX_GPCV2
bool
select IRQ_DOMAIN
help
Enables the wakeup IRQs for IMX platforms with GPCv2 block
config IRQ_MXS
def_bool y if MACH_ASM9260 || ARCH_MXS
select IRQ_DOMAIN
select STMP_DEVICE
config MSCC_OCELOT_IRQ
bool
select IRQ_DOMAIN
select GENERIC_IRQ_CHIP
config MVEBU_GICP
bool
config MVEBU_ICU
bool
config MVEBU_ODMI
bool
select GENERIC_MSI_IRQ_DOMAIN
config MVEBU_PIC
bool
config MVEBU_SEI
bool
config LS_EXTIRQ
def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
select MFD_SYSCON
config LS_SCFG_MSI
def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
depends on PCI && PCI_MSI
config PARTITION_PERCPU
bool
config STM32_EXTI
bool
select IRQ_DOMAIN
select GENERIC_IRQ_CHIP
config QCOM_IRQ_COMBINER
bool "QCOM IRQ combiner support"
depends on ARCH_QCOM && ACPI
select IRQ_DOMAIN_HIERARCHY
help
Say yes here to add support for the IRQ combiner devices embedded
in Qualcomm Technologies chips.
config IRQ_UNIPHIER_AIDET
bool "UniPhier AIDET support" if COMPILE_TEST
depends on ARCH_UNIPHIER || COMPILE_TEST
default ARCH_UNIPHIER
select IRQ_DOMAIN_HIERARCHY
help
Support for the UniPhier AIDET (ARM Interrupt Detector).
config MESON_IRQ_GPIO
bool "Meson GPIO Interrupt Multiplexer"
depends on ARCH_MESON
select IRQ_DOMAIN_HIERARCHY
help
Support Meson SoC Family GPIO Interrupt Multiplexer
config GOLDFISH_PIC
bool "Goldfish programmable interrupt controller"
depends on MIPS && (GOLDFISH || COMPILE_TEST)
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
help
Say yes here to enable Goldfish interrupt controller driver used
for Goldfish based virtual platforms.
config QCOM_PDC
tristate "QCOM PDC"
depends on ARCH_QCOM
select IRQ_DOMAIN_HIERARCHY
help
Power Domain Controller driver to manage and configure wakeup
IRQs for Qualcomm Technologies Inc (QTI) mobile chips.
config CSKY_MPINTC
bool
depends on CSKY
help
Say yes here to enable C-SKY SMP interrupt controller driver used
for C-SKY SMP system.
In fact it's not mmio map in hardware and it uses ld/st to visit the
controller's register inside CPU.
config CSKY_APB_INTC
bool "C-SKY APB Interrupt Controller"
depends on CSKY
help
Say yes here to enable C-SKY APB interrupt controller driver used
by C-SKY single core SOC system. It uses mmio map apb-bus to visit
the controller's register.
config IMX_IRQSTEER
bool "i.MX IRQSTEER support"
depends on ARCH_MXC || COMPILE_TEST
default ARCH_MXC
select IRQ_DOMAIN
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
config IMX_INTMUX
bool "i.MX INTMUX support" if COMPILE_TEST
default y if ARCH_MXC
select IRQ_DOMAIN
help
Support for the i.MX INTMUX interrupt multiplexer.
config LS1X_IRQ
bool "Loongson-1 Interrupt Controller"
depends on MACH_LOONGSON32
default y
select IRQ_DOMAIN
select GENERIC_IRQ_CHIP
help
Support for the Loongson-1 platform Interrupt Controller.
config TI_SCI_INTR_IRQCHIP
bool
depends on TI_SCI_PROTOCOL
select IRQ_DOMAIN_HIERARCHY
help
This enables the irqchip driver support for K3 Interrupt router
over TI System Control Interface available on some new TI's SoCs.
If you wish to use interrupt router irq resources managed by the
TI System Controller, say Y here. Otherwise, say N.
config TI_SCI_INTA_IRQCHIP
bool
depends on TI_SCI_PROTOCOL
select IRQ_DOMAIN_HIERARCHY
select TI_SCI_INTA_MSI_DOMAIN
help
This enables the irqchip driver support for K3 Interrupt aggregator
over TI System Control Interface available on some new TI's SoCs.
If you wish to use interrupt aggregator irq resources managed by the
TI System Controller, say Y here. Otherwise, say N.
config TI_PRUSS_INTC
tristate
depends on TI_PRUSS
default TI_PRUSS
select IRQ_DOMAIN
help
This enables support for the PRU-ICSS Local Interrupt Controller
present within a PRU-ICSS subsystem present on various TI SoCs.
The PRUSS INTC enables various interrupts to be routed to multiple
different processors within the SoC.
config RISCV_INTC
bool "RISC-V Local Interrupt Controller"
depends on RISCV
default y
help
This enables support for the per-HART local interrupt controller
found in standard RISC-V systems. The per-HART local interrupt
controller handles timer interrupts, software interrupts, and
hardware interrupts. Without a per-HART local interrupt controller,
a RISC-V system will be unable to handle any interrupts.
If you don't know what to do here, say Y.
config SIFIVE_PLIC
bool "SiFive Platform-Level Interrupt Controller"
depends on RISCV
select IRQ_DOMAIN_HIERARCHY
help
This enables support for the PLIC chip found in SiFive (and
potentially other) RISC-V systems. The PLIC controls devices
interrupts and connects them to each core's local interrupt
controller. Aside from timer and software interrupts, all other
interrupt sources are subordinate to the PLIC.
If you don't know what to do here, say Y.
config EXYNOS_IRQ_COMBINER
bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
help
Say yes here to add support for the IRQ combiner devices embedded
in Samsung Exynos chips.
config LOONGSON_LIOINTC
bool "Loongson Local I/O Interrupt Controller"
depends on MACH_LOONGSON64
default y
select IRQ_DOMAIN
select GENERIC_IRQ_CHIP
help
Support for the Loongson Local I/O Interrupt Controller.
config LOONGSON_HTPIC
bool "Loongson3 HyperTransport PIC Controller"
depends on MACH_LOONGSON64
default y
select IRQ_DOMAIN
select GENERIC_IRQ_CHIP
help
Support for the Loongson-3 HyperTransport PIC Controller.
config LOONGSON_HTVEC
bool "Loongson3 HyperTransport Interrupt Vector Controller"
depends on MACH_LOONGSON64
default MACH_LOONGSON64
select IRQ_DOMAIN_HIERARCHY
help
Support for the Loongson3 HyperTransport Interrupt Vector Controller.
config LOONGSON_PCH_PIC
bool "Loongson PCH PIC Controller"
depends on MACH_LOONGSON64 || COMPILE_TEST
default MACH_LOONGSON64
select IRQ_DOMAIN_HIERARCHY
select IRQ_FASTEOI_HIERARCHY_HANDLERS
help
Support for the Loongson PCH PIC Controller.
config LOONGSON_PCH_MSI
bool "Loongson PCH MSI Controller"
depends on MACH_LOONGSON64 || COMPILE_TEST
depends on PCI
default MACH_LOONGSON64
select IRQ_DOMAIN_HIERARCHY
select PCI_MSI
help
Support for the Loongson PCH MSI Controller.
config MST_IRQ
bool "MStar Interrupt Controller"
depends on ARCH_MEDIATEK || ARCH_MSTARV7 || COMPILE_TEST
default ARCH_MEDIATEK
select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
help
Support MStar Interrupt Controller.
config WPCM450_AIC
bool "Nuvoton WPCM450 Advanced Interrupt Controller"
depends on ARCH_WPCM450
help
Support for the interrupt controller in the Nuvoton WPCM450 BMC SoC.
config IRQ_IDT3243X
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
config APPLE_AIC
bool "Apple Interrupt Controller (AIC)"
depends on ARM64
depends on ARCH_APPLE || COMPILE_TEST
help
Support for the Apple Interrupt Controller found on Apple Silicon SoCs,
such as the M1.
endmenu
|