Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 18.117.104.132
/*
* linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
*
* David A Rusling
*
* Copyright (C) 2001 ARM Limited
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/fb.h>
#include <linux/amba/clcd-regs.h>
enum {
/* individual formats */
CLCD_CAP_RGB444 = (1 << 0),
CLCD_CAP_RGB5551 = (1 << 1),
CLCD_CAP_RGB565 = (1 << 2),
CLCD_CAP_RGB888 = (1 << 3),
CLCD_CAP_BGR444 = (1 << 4),
CLCD_CAP_BGR5551 = (1 << 5),
CLCD_CAP_BGR565 = (1 << 6),
CLCD_CAP_BGR888 = (1 << 7),
/* connection layouts */
CLCD_CAP_444 = CLCD_CAP_RGB444 | CLCD_CAP_BGR444,
CLCD_CAP_5551 = CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551,
CLCD_CAP_565 = CLCD_CAP_RGB565 | CLCD_CAP_BGR565,
CLCD_CAP_888 = CLCD_CAP_RGB888 | CLCD_CAP_BGR888,
/* red/blue ordering */
CLCD_CAP_RGB = CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 |
CLCD_CAP_RGB565 | CLCD_CAP_RGB888,
CLCD_CAP_BGR = CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 |
CLCD_CAP_BGR565 | CLCD_CAP_BGR888,
CLCD_CAP_ALL = CLCD_CAP_BGR | CLCD_CAP_RGB,
};
struct backlight_device;
struct clcd_panel {
struct fb_videomode mode;
signed short width; /* width in mm */
signed short height; /* height in mm */
u32 tim2;
u32 tim3;
u32 cntl;
u32 caps;
unsigned int bpp:8,
fixedtimings:1,
grayscale:1;
unsigned int connector;
struct backlight_device *backlight;
/*
* If the B/R lines are switched between the CLCD
* and the panel we need to know this and not try to
* compensate with the BGR bit in the control register.
*/
bool bgr_connection;
};
struct clcd_regs {
u32 tim0;
u32 tim1;
u32 tim2;
u32 tim3;
u32 cntl;
unsigned long pixclock;
};
struct clcd_fb;
/*
* the board-type specific routines
*/
struct clcd_board {
const char *name;
/*
* Optional. Hardware capability flags.
*/
u32 caps;
/*
* Optional. Check whether the var structure is acceptable
* for this display.
*/
int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
/*
* Compulsory. Decode fb->fb.var into regs->*. In the case of
* fixed timing, set regs->* to the register values required.
*/
void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
/*
* Optional. Disable any extra display hardware.
*/
void (*disable)(struct clcd_fb *);
/*
* Optional. Enable any extra display hardware.
*/
void (*enable)(struct clcd_fb *);
/*
* Setup platform specific parts of CLCD driver
*/
int (*setup)(struct clcd_fb *);
/*
* mmap the framebuffer memory
*/
int (*mmap)(struct clcd_fb *, struct vm_area_struct *);
/*
* Remove platform specific parts of CLCD driver
*/
void (*remove)(struct clcd_fb *);
};
struct amba_device;
struct clk;
/* this data structure describes each frame buffer device we find */
struct clcd_fb {
struct fb_info fb;
struct amba_device *dev;
struct clk *clk;
struct clcd_panel *panel;
struct clcd_board *board;
void *board_data;
void __iomem *regs;
u16 off_ienb;
u16 off_cntl;
u32 clcd_cntl;
u32 cmap[16];
bool clk_enabled;
};
static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
{
struct fb_var_screeninfo *var = &fb->fb.var;
u32 val, cpl;
/*
* Program the CLCD controller registers and start the CLCD
*/
val = ((var->xres / 16) - 1) << 2;
val |= (var->hsync_len - 1) << 8;
val |= (var->right_margin - 1) << 16;
val |= (var->left_margin - 1) << 24;
regs->tim0 = val;
val = var->yres;
if (fb->panel->cntl & CNTL_LCDDUAL)
val /= 2;
val -= 1;
val |= (var->vsync_len - 1) << 10;
val |= var->lower_margin << 16;
val |= var->upper_margin << 24;
regs->tim1 = val;
val = fb->panel->tim2;
val |= var->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
cpl = var->xres_virtual;
if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */
/* / 1 */;
else if (!var->grayscale) /* STN color */
cpl = cpl * 8 / 3;
else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
cpl /= 8;
else /* STN monochrome, 4bit */
cpl /= 4;
regs->tim2 = val | ((cpl - 1) << 16);
regs->tim3 = fb->panel->tim3;
val = fb->panel->cntl;
if (var->grayscale)
val |= CNTL_LCDBW;
if (fb->panel->caps && fb->board->caps && var->bits_per_pixel >= 16) {
/*
* if board and panel supply capabilities, we can support
* changing BGR/RGB depending on supplied parameters. Here
* we switch to what the framebuffer is providing if need
* be, so if the framebuffer is BGR but the display connection
* is RGB (first case) we switch it around. Vice versa mutatis
* mutandis if the framebuffer is RGB but the display connection
* is BGR, we flip it around.
*/
if (var->red.offset == 0)
val &= ~CNTL_BGR;
else
val |= CNTL_BGR;
if (fb->panel->bgr_connection)
val ^= CNTL_BGR;
}
switch (var->bits_per_pixel) {
case 1:
val |= CNTL_LCDBPP1;
break;
case 2:
val |= CNTL_LCDBPP2;
break;
case 4:
val |= CNTL_LCDBPP4;
break;
case 8:
val |= CNTL_LCDBPP8;
break;
case 16:
/*
* PL110 cannot choose between 5551 and 565 modes in its
* control register. It is possible to use 565 with
* custom external wiring.
*/
if (amba_part(fb->dev) == 0x110 ||
var->green.length == 5)
val |= CNTL_LCDBPP16;
else if (var->green.length == 6)
val |= CNTL_LCDBPP16_565;
else
val |= CNTL_LCDBPP16_444;
break;
case 32:
val |= CNTL_LCDBPP24;
break;
}
regs->cntl = val;
regs->pixclock = var->pixclock;
}
static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
{
var->xres_virtual = var->xres = (var->xres + 15) & ~15;
var->yres_virtual = var->yres = (var->yres + 1) & ~1;
#define CHECK(e,l,h) (var->e < l || var->e > h)
if (CHECK(right_margin, (5+1), 256) || /* back porch */
CHECK(left_margin, (5+1), 256) || /* front porch */
CHECK(hsync_len, (5+1), 256) ||
var->xres > 4096 ||
var->lower_margin > 255 || /* back porch */
var->upper_margin > 255 || /* front porch */
var->vsync_len > 32 ||
var->yres > 1024)
return -EINVAL;
#undef CHECK
/* single panel mode: PCD = max(PCD, 1) */
/* dual panel mode: PCD = max(PCD, 5) */
/*
* You can't change the grayscale setting, and
* we can only do non-interlaced video.
*/
if (var->grayscale != fb->fb.var.grayscale ||
(var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
return -EINVAL;
#define CHECK(e) (var->e != fb->fb.var.e)
if (fb->panel->fixedtimings &&
(CHECK(xres) ||
CHECK(yres) ||
CHECK(bits_per_pixel) ||
CHECK(pixclock) ||
CHECK(left_margin) ||
CHECK(right_margin) ||
CHECK(upper_margin) ||
CHECK(lower_margin) ||
CHECK(hsync_len) ||
CHECK(vsync_len) ||
CHECK(sync)))
return -EINVAL;
#undef CHECK
var->nonstd = 0;
var->accel_flags = 0;
return 0;
}
|