Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 3.12.146.108
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com
*/
#ifndef K3_PSIL_H_
#define K3_PSIL_H_
#include <linux/types.h>
#define K3_PSIL_DST_THREAD_ID_OFFSET 0x8000
struct device;
/**
* enum udma_tp_level - Channel Throughput Levels
* @UDMA_TP_NORMAL: Normal channel
* @UDMA_TP_HIGH: High Throughput channel
* @UDMA_TP_ULTRAHIGH: Ultra High Throughput channel
*/
enum udma_tp_level {
UDMA_TP_NORMAL = 0,
UDMA_TP_HIGH,
UDMA_TP_ULTRAHIGH,
UDMA_TP_LAST,
};
/**
* enum psil_endpoint_type - PSI-L Endpoint type
* @PSIL_EP_NATIVE: Normal channel
* @PSIL_EP_PDMA_XY: XY mode PDMA
* @PSIL_EP_PDMA_MCAN: MCAN mode PDMA
* @PSIL_EP_PDMA_AASRC: AASRC mode PDMA
*/
enum psil_endpoint_type {
PSIL_EP_NATIVE = 0,
PSIL_EP_PDMA_XY,
PSIL_EP_PDMA_MCAN,
PSIL_EP_PDMA_AASRC,
};
/**
* struct psil_endpoint_config - PSI-L Endpoint configuration
* @ep_type: PSI-L endpoint type
* @channel_tpl: Desired throughput level for the channel
* @pkt_mode: If set, the channel must be in Packet mode, otherwise in
* TR mode
* @notdpkt: TDCM must be suppressed on the TX channel
* @needs_epib: Endpoint needs EPIB
* @pdma_acc32: ACC32 must be enabled on the PDMA side
* @pdma_burst: BURST must be enabled on the PDMA side
* @psd_size: If set, PSdata is used by the endpoint
* @mapped_channel_id: PKTDMA thread to channel mapping for mapped channels.
* The thread must be serviced by the specified channel if
* mapped_channel_id is >= 0 in case of PKTDMA
* @flow_start: PKDMA flow range start of mapped channel. Unmapped
* channels use flow_id == chan_id
* @flow_num: PKDMA flow count of mapped channel. Unmapped channels
* use flow_id == chan_id
* @default_flow_id: PKDMA default (r)flow index of mapped channel.
* Must be within the flow range of the mapped channel.
*/
struct psil_endpoint_config {
enum psil_endpoint_type ep_type;
enum udma_tp_level channel_tpl;
unsigned pkt_mode:1;
unsigned notdpkt:1;
unsigned needs_epib:1;
/* PDMA properties, valid for PSIL_EP_PDMA_* */
unsigned pdma_acc32:1;
unsigned pdma_burst:1;
u32 psd_size;
/* PKDMA mapped channel */
s16 mapped_channel_id;
/* PKTDMA tflow and rflow ranges for mapped channel */
u16 flow_start;
u16 flow_num;
s16 default_flow_id;
};
int psil_set_new_ep_config(struct device *dev, const char *name,
struct psil_endpoint_config *ep_config);
#endif /* K3_PSIL_H_ */
|