Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 13.59.67.189
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Intel MAX 10 Board Management Controller chip.
*
* Copyright (C) 2018-2020 Intel Corporation, Inc.
*/
#ifndef __MFD_INTEL_M10_BMC_H
#define __MFD_INTEL_M10_BMC_H
#include <linux/regmap.h>
#define M10BMC_LEGACY_BUILD_VER 0x300468
#define M10BMC_SYS_BASE 0x300800
#define M10BMC_SYS_END 0x300fff
#define M10BMC_FLASH_BASE 0x10000000
#define M10BMC_FLASH_END 0x1fffffff
#define M10BMC_MEM_END M10BMC_FLASH_END
#define M10BMC_STAGING_BASE 0x18000000
#define M10BMC_STAGING_SIZE 0x3800000
/* Register offset of system registers */
#define NIOS2_FW_VERSION 0x0
#define M10BMC_MAC_LOW 0x10
#define M10BMC_MAC_BYTE4 GENMASK(7, 0)
#define M10BMC_MAC_BYTE3 GENMASK(15, 8)
#define M10BMC_MAC_BYTE2 GENMASK(23, 16)
#define M10BMC_MAC_BYTE1 GENMASK(31, 24)
#define M10BMC_MAC_HIGH 0x14
#define M10BMC_MAC_BYTE6 GENMASK(7, 0)
#define M10BMC_MAC_BYTE5 GENMASK(15, 8)
#define M10BMC_MAC_COUNT GENMASK(23, 16)
#define M10BMC_TEST_REG 0x3c
#define M10BMC_BUILD_VER 0x68
#define M10BMC_VER_MAJOR_MSK GENMASK(23, 16)
#define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24)
#define M10BMC_VER_LEGACY_INVALID 0xffffffff
/* Secure update doorbell register, in system register region */
#define M10BMC_DOORBELL 0x400
/* Authorization Result register, in system register region */
#define M10BMC_AUTH_RESULT 0x404
/* Doorbell register fields */
#define DRBL_RSU_REQUEST BIT(0)
#define DRBL_RSU_PROGRESS GENMASK(7, 4)
#define DRBL_HOST_STATUS GENMASK(11, 8)
#define DRBL_RSU_STATUS GENMASK(23, 16)
#define DRBL_PKVL_EEPROM_LOAD_SEC BIT(24)
#define DRBL_PKVL1_POLL_EN BIT(25)
#define DRBL_PKVL2_POLL_EN BIT(26)
#define DRBL_CONFIG_SEL BIT(28)
#define DRBL_REBOOT_REQ BIT(29)
#define DRBL_REBOOT_DISABLED BIT(30)
/* Progress states */
#define RSU_PROG_IDLE 0x0
#define RSU_PROG_PREPARE 0x1
#define RSU_PROG_READY 0x3
#define RSU_PROG_AUTHENTICATING 0x4
#define RSU_PROG_COPYING 0x5
#define RSU_PROG_UPDATE_CANCEL 0x6
#define RSU_PROG_PROGRAM_KEY_HASH 0x7
#define RSU_PROG_RSU_DONE 0x8
#define RSU_PROG_PKVL_PROM_DONE 0x9
/* Device and error states */
#define RSU_STAT_NORMAL 0x0
#define RSU_STAT_TIMEOUT 0x1
#define RSU_STAT_AUTH_FAIL 0x2
#define RSU_STAT_COPY_FAIL 0x3
#define RSU_STAT_FATAL 0x4
#define RSU_STAT_PKVL_REJECT 0x5
#define RSU_STAT_NON_INC 0x6
#define RSU_STAT_ERASE_FAIL 0x7
#define RSU_STAT_WEAROUT 0x8
#define RSU_STAT_NIOS_OK 0x80
#define RSU_STAT_USER_OK 0x81
#define RSU_STAT_FACTORY_OK 0x82
#define RSU_STAT_USER_FAIL 0x83
#define RSU_STAT_FACTORY_FAIL 0x84
#define RSU_STAT_NIOS_FLASH_ERR 0x85
#define RSU_STAT_FPGA_FLASH_ERR 0x86
#define HOST_STATUS_IDLE 0x0
#define HOST_STATUS_WRITE_DONE 0x1
#define HOST_STATUS_ABORT_RSU 0x2
#define rsu_prog(doorbell) FIELD_GET(DRBL_RSU_PROGRESS, doorbell)
#define rsu_stat(doorbell) FIELD_GET(DRBL_RSU_STATUS, doorbell)
/* interval 100ms and timeout 5s */
#define NIOS_HANDSHAKE_INTERVAL_US (100 * 1000)
#define NIOS_HANDSHAKE_TIMEOUT_US (5 * 1000 * 1000)
/* RSU PREP Timeout (2 minutes) to erase flash staging area */
#define RSU_PREP_INTERVAL_MS 100
#define RSU_PREP_TIMEOUT_MS (2 * 60 * 1000)
/* RSU Complete Timeout (40 minutes) for full flash update */
#define RSU_COMPLETE_INTERVAL_MS 1000
#define RSU_COMPLETE_TIMEOUT_MS (40 * 60 * 1000)
/* Addresses for security related data in FLASH */
#define BMC_REH_ADDR 0x17ffc004
#define BMC_PROG_ADDR 0x17ffc000
#define BMC_PROG_MAGIC 0x5746
#define SR_REH_ADDR 0x17ffd004
#define SR_PROG_ADDR 0x17ffd000
#define SR_PROG_MAGIC 0x5253
#define PR_REH_ADDR 0x17ffe004
#define PR_PROG_ADDR 0x17ffe000
#define PR_PROG_MAGIC 0x5250
/* Address of 4KB inverted bit vector containing staging area FLASH count */
#define STAGING_FLASH_COUNT 0x17ffb000
/**
* struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
* @dev: this device
* @regmap: the regmap used to access registers by m10bmc itself
*/
struct intel_m10bmc {
struct device *dev;
struct regmap *regmap;
};
/*
* register access helper functions.
*
* m10bmc_raw_read - read m10bmc register per addr
* m10bmc_sys_read - read m10bmc system register per offset
*/
static inline int
m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
unsigned int *val)
{
int ret;
ret = regmap_read(m10bmc->regmap, addr, val);
if (ret)
dev_err(m10bmc->dev, "fail to read raw reg %x: %d\n",
addr, ret);
return ret;
}
/*
* The base of the system registers could be configured by HW developers, and
* in HW SPEC, the base is not added to the addresses of the system registers.
*
* This macro helps to simplify the accessing of the system registers. And if
* the base is reconfigured in HW, SW developers could simply change the
* M10BMC_SYS_BASE accordingly.
*/
#define m10bmc_sys_read(m10bmc, offset, val) \
m10bmc_raw_read(m10bmc, M10BMC_SYS_BASE + (offset), val)
#endif /* __MFD_INTEL_M10_BMC_H */
|