Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 3.147.56.125
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* RCU node combining tree definitions. These are used to compute
* global attributes while avoiding common-case global contention. A key
* property that these computations rely on is a tournament-style approach
* where only one of the tasks contending a lower level in the tree need
* advance to the next higher level. If properly configured, this allows
* unlimited scalability while maintaining a constant level of contention
* on the root node.
*
* This seemingly RCU-private file must be available to SRCU users
* because the size of the TREE SRCU srcu_struct structure depends
* on these definitions.
*
* Copyright IBM Corporation, 2017
*
* Author: Paul E. McKenney <paulmck@linux.ibm.com>
*/
#ifndef __LINUX_RCU_NODE_TREE_H
#define __LINUX_RCU_NODE_TREE_H
#include <linux/math.h>
/*
* Define shape of hierarchy based on NR_CPUS, CONFIG_RCU_FANOUT, and
* CONFIG_RCU_FANOUT_LEAF.
* In theory, it should be possible to add more levels straightforwardly.
* In practice, this did work well going from three levels to four.
* Of course, your mileage may vary.
*/
#ifdef CONFIG_RCU_FANOUT
#define RCU_FANOUT CONFIG_RCU_FANOUT
#else /* #ifdef CONFIG_RCU_FANOUT */
# ifdef CONFIG_64BIT
# define RCU_FANOUT 64
# else
# define RCU_FANOUT 32
# endif
#endif /* #else #ifdef CONFIG_RCU_FANOUT */
#ifdef CONFIG_RCU_FANOUT_LEAF
#define RCU_FANOUT_LEAF CONFIG_RCU_FANOUT_LEAF
#else /* #ifdef CONFIG_RCU_FANOUT_LEAF */
#define RCU_FANOUT_LEAF 16
#endif /* #else #ifdef CONFIG_RCU_FANOUT_LEAF */
#define RCU_FANOUT_1 (RCU_FANOUT_LEAF)
#define RCU_FANOUT_2 (RCU_FANOUT_1 * RCU_FANOUT)
#define RCU_FANOUT_3 (RCU_FANOUT_2 * RCU_FANOUT)
#define RCU_FANOUT_4 (RCU_FANOUT_3 * RCU_FANOUT)
#if NR_CPUS <= RCU_FANOUT_1
# define RCU_NUM_LVLS 1
# define NUM_RCU_LVL_0 1
# define NUM_RCU_NODES NUM_RCU_LVL_0
# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0 }
# define RCU_NODE_NAME_INIT { "rcu_node_0" }
# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0" }
#elif NR_CPUS <= RCU_FANOUT_2
# define RCU_NUM_LVLS 2
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_NODES (NUM_RCU_LVL_0 + NUM_RCU_LVL_1)
# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1 }
# define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1" }
# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1" }
#elif NR_CPUS <= RCU_FANOUT_3
# define RCU_NUM_LVLS 3
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_NODES (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2)
# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2 }
# define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1", "rcu_node_2" }
# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2" }
#elif NR_CPUS <= RCU_FANOUT_4
# define RCU_NUM_LVLS 4
# define NUM_RCU_LVL_0 1
# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_3)
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
# define NUM_RCU_LVL_3 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_NODES (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3)
# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2, NUM_RCU_LVL_3 }
# define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1", "rcu_node_2", "rcu_node_3" }
# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2", "rcu_node_fqs_3" }
#else
# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
#endif /* #if (NR_CPUS) <= RCU_FANOUT_1 */
#endif /* __LINUX_RCU_NODE_TREE_H */
|