Linux lhjmq-records 5.15.0-118-generic #128-Ubuntu SMP Fri Jul 5 09:28:59 UTC 2024 x86_64
Your IP : 3.144.41.252
/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
/*
* Xilinx SD-FEC
*
* Copyright (C) 2019 Xilinx, Inc.
*
* Description:
* This driver is developed for SDFEC16 IP. It provides a char device
* in sysfs and supports file operations like open(), close() and ioctl().
*/
#ifndef __XILINX_SDFEC_H__
#define __XILINX_SDFEC_H__
#include <linux/types.h>
/* Shared LDPC Tables */
#define XSDFEC_LDPC_SC_TABLE_ADDR_BASE (0x10000)
#define XSDFEC_LDPC_SC_TABLE_ADDR_HIGH (0x10400)
#define XSDFEC_LDPC_LA_TABLE_ADDR_BASE (0x18000)
#define XSDFEC_LDPC_LA_TABLE_ADDR_HIGH (0x19000)
#define XSDFEC_LDPC_QC_TABLE_ADDR_BASE (0x20000)
#define XSDFEC_LDPC_QC_TABLE_ADDR_HIGH (0x28000)
/* LDPC tables depth */
#define XSDFEC_SC_TABLE_DEPTH \
(XSDFEC_LDPC_SC_TABLE_ADDR_HIGH - XSDFEC_LDPC_SC_TABLE_ADDR_BASE)
#define XSDFEC_LA_TABLE_DEPTH \
(XSDFEC_LDPC_LA_TABLE_ADDR_HIGH - XSDFEC_LDPC_LA_TABLE_ADDR_BASE)
#define XSDFEC_QC_TABLE_DEPTH \
(XSDFEC_LDPC_QC_TABLE_ADDR_HIGH - XSDFEC_LDPC_QC_TABLE_ADDR_BASE)
/**
* enum xsdfec_code - Code Type.
* @XSDFEC_TURBO_CODE: Driver is configured for Turbo mode.
* @XSDFEC_LDPC_CODE: Driver is configured for LDPC mode.
*
* This enum is used to indicate the mode of the driver. The mode is determined
* by checking which codes are set in the driver. Note that the mode cannot be
* changed by the driver.
*/
enum xsdfec_code {
XSDFEC_TURBO_CODE = 0,
XSDFEC_LDPC_CODE,
};
/**
* enum xsdfec_order - Order
* @XSDFEC_MAINTAIN_ORDER: Maintain order execution of blocks.
* @XSDFEC_OUT_OF_ORDER: Out-of-order execution of blocks.
*
* This enum is used to indicate whether the order of blocks can change from
* input to output.
*/
enum xsdfec_order {
XSDFEC_MAINTAIN_ORDER = 0,
XSDFEC_OUT_OF_ORDER,
};
/**
* enum xsdfec_turbo_alg - Turbo Algorithm Type.
* @XSDFEC_MAX_SCALE: Max Log-Map algorithm with extrinsic scaling. When
* scaling is set to this is equivalent to the Max Log-Map
* algorithm.
* @XSDFEC_MAX_STAR: Log-Map algorithm.
* @XSDFEC_TURBO_ALG_MAX: Used to indicate out of bound Turbo algorithms.
*
* This enum specifies which Turbo Decode algorithm is in use.
*/
enum xsdfec_turbo_alg {
XSDFEC_MAX_SCALE = 0,
XSDFEC_MAX_STAR,
XSDFEC_TURBO_ALG_MAX,
};
/**
* enum xsdfec_state - State.
* @XSDFEC_INIT: Driver is initialized.
* @XSDFEC_STARTED: Driver is started.
* @XSDFEC_STOPPED: Driver is stopped.
* @XSDFEC_NEEDS_RESET: Driver needs to be reset.
* @XSDFEC_PL_RECONFIGURE: Programmable Logic needs to be recofigured.
*
* This enum is used to indicate the state of the driver.
*/
enum xsdfec_state {
XSDFEC_INIT = 0,
XSDFEC_STARTED,
XSDFEC_STOPPED,
XSDFEC_NEEDS_RESET,
XSDFEC_PL_RECONFIGURE,
};
/**
* enum xsdfec_axis_width - AXIS_WIDTH.DIN Setting for 128-bit width.
* @XSDFEC_1x128b: DIN data input stream consists of a 128-bit lane
* @XSDFEC_2x128b: DIN data input stream consists of two 128-bit lanes
* @XSDFEC_4x128b: DIN data input stream consists of four 128-bit lanes
*
* This enum is used to indicate the AXIS_WIDTH.DIN setting for 128-bit width.
* The number of lanes of the DIN data input stream depends upon the
* AXIS_WIDTH.DIN parameter.
*/
enum xsdfec_axis_width {
XSDFEC_1x128b = 1,
XSDFEC_2x128b = 2,
XSDFEC_4x128b = 4,
};
/**
* enum xsdfec_axis_word_include - Words Configuration.
* @XSDFEC_FIXED_VALUE: Fixed, the DIN_WORDS AXI4-Stream interface is removed
* from the IP instance and is driven with the specified
* number of words.
* @XSDFEC_IN_BLOCK: In Block, configures the IP instance to expect a single
* DIN_WORDS value per input code block. The DIN_WORDS
* interface is present.
* @XSDFEC_PER_AXI_TRANSACTION: Per Transaction, configures the IP instance to
* expect one DIN_WORDS value per input transaction on the DIN interface. The
* DIN_WORDS interface is present.
* @XSDFEC_AXIS_WORDS_INCLUDE_MAX: Used to indicate out of bound Words
* Configurations.
*
* This enum is used to specify the DIN_WORDS configuration.
*/
enum xsdfec_axis_word_include {
XSDFEC_FIXED_VALUE = 0,
XSDFEC_IN_BLOCK,
XSDFEC_PER_AXI_TRANSACTION,
XSDFEC_AXIS_WORDS_INCLUDE_MAX,
};
/**
* struct xsdfec_turbo - User data for Turbo codes.
* @alg: Specifies which Turbo decode algorithm to use
* @scale: Specifies the extrinsic scaling to apply when the Max Scale algorithm
* has been selected
*
* Turbo code structure to communicate parameters to XSDFEC driver.
*/
struct xsdfec_turbo {
__u32 alg;
__u8 scale;
};
/**
* struct xsdfec_ldpc_params - User data for LDPC codes.
* @n: Number of code word bits
* @k: Number of information bits
* @psize: Size of sub-matrix
* @nlayers: Number of layers in code
* @nqc: Quasi Cyclic Number
* @nmqc: Number of M-sized QC operations in parity check matrix
* @nm: Number of M-size vectors in N
* @norm_type: Normalization required or not
* @no_packing: Determines if multiple QC ops should be performed
* @special_qc: Sub-Matrix property for Circulant weight > 0
* @no_final_parity: Decide if final parity check needs to be performed
* @max_schedule: Experimental code word scheduling limit
* @sc_off: SC offset
* @la_off: LA offset
* @qc_off: QC offset
* @sc_table: Pointer to SC Table which must be page aligned
* @la_table: Pointer to LA Table which must be page aligned
* @qc_table: Pointer to QC Table which must be page aligned
* @code_id: LDPC Code
*
* This structure describes the LDPC code that is passed to the driver by the
* application.
*/
struct xsdfec_ldpc_params {
__u32 n;
__u32 k;
__u32 psize;
__u32 nlayers;
__u32 nqc;
__u32 nmqc;
__u32 nm;
__u32 norm_type;
__u32 no_packing;
__u32 special_qc;
__u32 no_final_parity;
__u32 max_schedule;
__u32 sc_off;
__u32 la_off;
__u32 qc_off;
__u32 *sc_table;
__u32 *la_table;
__u32 *qc_table;
__u16 code_id;
};
/**
* struct xsdfec_status - Status of SD-FEC core.
* @state: State of the SD-FEC core
* @activity: Describes if the SD-FEC instance is Active
*/
struct xsdfec_status {
__u32 state;
__s8 activity;
};
/**
* struct xsdfec_irq - Enabling or Disabling Interrupts.
* @enable_isr: If true enables the ISR
* @enable_ecc_isr: If true enables the ECC ISR
*/
struct xsdfec_irq {
__s8 enable_isr;
__s8 enable_ecc_isr;
};
/**
* struct xsdfec_config - Configuration of SD-FEC core.
* @code: The codes being used by the SD-FEC instance
* @order: Order of Operation
* @din_width: Width of the DIN AXI4-Stream
* @din_word_include: How DIN_WORDS are inputted
* @dout_width: Width of the DOUT AXI4-Stream
* @dout_word_include: HOW DOUT_WORDS are outputted
* @irq: Enabling or disabling interrupts
* @bypass: Is the core being bypassed
* @code_wr_protect: Is write protection of LDPC codes enabled
*/
struct xsdfec_config {
__u32 code;
__u32 order;
__u32 din_width;
__u32 din_word_include;
__u32 dout_width;
__u32 dout_word_include;
struct xsdfec_irq irq;
__s8 bypass;
__s8 code_wr_protect;
};
/**
* struct xsdfec_stats - Stats retrived by ioctl XSDFEC_GET_STATS. Used
* to buffer atomic_t variables from struct
* xsdfec_dev. Counts are accumulated until
* the user clears them.
* @isr_err_count: Count of ISR errors
* @cecc_count: Count of Correctable ECC errors (SBE)
* @uecc_count: Count of Uncorrectable ECC errors (MBE)
*/
struct xsdfec_stats {
__u32 isr_err_count;
__u32 cecc_count;
__u32 uecc_count;
};
/**
* struct xsdfec_ldpc_param_table_sizes - Used to store sizes of SD-FEC table
* entries for an individual LPDC code
* parameter.
* @sc_size: Size of SC table used
* @la_size: Size of LA table used
* @qc_size: Size of QC table used
*/
struct xsdfec_ldpc_param_table_sizes {
__u32 sc_size;
__u32 la_size;
__u32 qc_size;
};
/*
* XSDFEC IOCTL List
*/
#define XSDFEC_MAGIC 'f'
/**
* DOC: XSDFEC_START_DEV
*
* @Description
*
* ioctl to start SD-FEC core
*
* This fails if the XSDFEC_SET_ORDER ioctl has not been previously called
*/
#define XSDFEC_START_DEV _IO(XSDFEC_MAGIC, 0)
/**
* DOC: XSDFEC_STOP_DEV
*
* @Description
*
* ioctl to stop the SD-FEC core
*/
#define XSDFEC_STOP_DEV _IO(XSDFEC_MAGIC, 1)
/**
* DOC: XSDFEC_GET_STATUS
*
* @Description
*
* ioctl that returns status of SD-FEC core
*/
#define XSDFEC_GET_STATUS _IOR(XSDFEC_MAGIC, 2, struct xsdfec_status)
/**
* DOC: XSDFEC_SET_IRQ
* @Parameters
*
* @struct xsdfec_irq *
* Pointer to the &struct xsdfec_irq that contains the interrupt settings
* for the SD-FEC core
*
* @Description
*
* ioctl to enable or disable irq
*/
#define XSDFEC_SET_IRQ _IOW(XSDFEC_MAGIC, 3, struct xsdfec_irq)
/**
* DOC: XSDFEC_SET_TURBO
* @Parameters
*
* @struct xsdfec_turbo *
* Pointer to the &struct xsdfec_turbo that contains the Turbo decode
* settings for the SD-FEC core
*
* @Description
*
* ioctl that sets the SD-FEC Turbo parameter values
*
* This can only be used when the driver is in the XSDFEC_STOPPED state
*/
#define XSDFEC_SET_TURBO _IOW(XSDFEC_MAGIC, 4, struct xsdfec_turbo)
/**
* DOC: XSDFEC_ADD_LDPC_CODE_PARAMS
* @Parameters
*
* @struct xsdfec_ldpc_params *
* Pointer to the &struct xsdfec_ldpc_params that contains the LDPC code
* parameters to be added to the SD-FEC Block
*
* @Description
* ioctl to add an LDPC code to the SD-FEC LDPC codes
*
* This can only be used when:
*
* - Driver is in the XSDFEC_STOPPED state
*
* - SD-FEC core is configured as LPDC
*
* - SD-FEC Code Write Protection is disabled
*/
#define XSDFEC_ADD_LDPC_CODE_PARAMS \
_IOW(XSDFEC_MAGIC, 5, struct xsdfec_ldpc_params)
/**
* DOC: XSDFEC_GET_CONFIG
* @Parameters
*
* @struct xsdfec_config *
* Pointer to the &struct xsdfec_config that contains the current
* configuration settings of the SD-FEC Block
*
* @Description
*
* ioctl that returns SD-FEC core configuration
*/
#define XSDFEC_GET_CONFIG _IOR(XSDFEC_MAGIC, 6, struct xsdfec_config)
/**
* DOC: XSDFEC_GET_TURBO
* @Parameters
*
* @struct xsdfec_turbo *
* Pointer to the &struct xsdfec_turbo that contains the current Turbo
* decode settings of the SD-FEC Block
*
* @Description
*
* ioctl that returns SD-FEC turbo param values
*/
#define XSDFEC_GET_TURBO _IOR(XSDFEC_MAGIC, 7, struct xsdfec_turbo)
/**
* DOC: XSDFEC_SET_ORDER
* @Parameters
*
* @struct unsigned long *
* Pointer to the unsigned long that contains a value from the
* @enum xsdfec_order
*
* @Description
*
* ioctl that sets order, if order of blocks can change from input to output
*
* This can only be used when the driver is in the XSDFEC_STOPPED state
*/
#define XSDFEC_SET_ORDER _IOW(XSDFEC_MAGIC, 8, unsigned long)
/**
* DOC: XSDFEC_SET_BYPASS
* @Parameters
*
* @struct bool *
* Pointer to bool that sets the bypass value, where false results in
* normal operation and false results in the SD-FEC performing the
* configured operations (same number of cycles) but output data matches
* the input data
*
* @Description
*
* ioctl that sets bypass.
*
* This can only be used when the driver is in the XSDFEC_STOPPED state
*/
#define XSDFEC_SET_BYPASS _IOW(XSDFEC_MAGIC, 9, bool)
/**
* DOC: XSDFEC_IS_ACTIVE
* @Parameters
*
* @struct bool *
* Pointer to bool that returns true if the SD-FEC is processing data
*
* @Description
*
* ioctl that determines if SD-FEC is processing data
*/
#define XSDFEC_IS_ACTIVE _IOR(XSDFEC_MAGIC, 10, bool)
/**
* DOC: XSDFEC_CLEAR_STATS
*
* @Description
*
* ioctl that clears error stats collected during interrupts
*/
#define XSDFEC_CLEAR_STATS _IO(XSDFEC_MAGIC, 11)
/**
* DOC: XSDFEC_GET_STATS
* @Parameters
*
* @struct xsdfec_stats *
* Pointer to the &struct xsdfec_stats that will contain the updated stats
* values
*
* @Description
*
* ioctl that returns SD-FEC core stats
*
* This can only be used when the driver is in the XSDFEC_STOPPED state
*/
#define XSDFEC_GET_STATS _IOR(XSDFEC_MAGIC, 12, struct xsdfec_stats)
/**
* DOC: XSDFEC_SET_DEFAULT_CONFIG
*
* @Description
*
* ioctl that returns SD-FEC core to default config, use after a reset
*
* This can only be used when the driver is in the XSDFEC_STOPPED state
*/
#define XSDFEC_SET_DEFAULT_CONFIG _IO(XSDFEC_MAGIC, 13)
#endif /* __XILINX_SDFEC_H__ */
|